Visonic SMD 426 PG2 Features And Benefits

SMD-426 PG2
Two-way Wireless Smoke
Detector
Features & Benefits:
•
PowerG two-way Frequency Hopping
®
Spread Spectrum FHSS-TDMA technology -
provides robustness and reliability closer
than ever to wired
•
Longer battery life for 5-8 years (with
typical use, according to battery type)
•
Provides sound and transmitted alerts
(for smoke, tamper, low battery)
•
Loud (85db) alarm sound at 3m (10ft)
•
Large transmission range enabling
repeater-free installations
•
Visible signal quality indication shown
on the device
•
Simple wall or ceiling installation, with
bracket
•
Back tamper
•
Fully certified by the most strict and
demanding international standards such as
EN 14604 for safety products in Europe, and
designed to comply with UL 268 in the USA.
, PowerG and PowerMaster are registered trademarks of Visonic Ltd. Other names are the property
of their owners. Visonic reserves the right to change information or specifications without notice.
SMD-426 PG2 is a fully supervised wire-
less photoelectric smoke detector that
is compatible with PowerMaster
less burglar alarm systems. Designed
for a wide range of residential and
commercial applications, this easily in-
stalled smoke detector has a stream-
lined design and an extended battery
life for easy and low-cost maintenance.
Specifications:
Battery type:
Weight
(including battery):
Operating
temperature:
Operating
environment:
Dimensions:
Certifications:
wire-
®
3V, CR123A / CR17450
Lithium battery
165g (5.8oz)
-10°C to 50°C
(14°F to 122°F)
Indoor
120 X 58mm
(4.7 X 2.3in)