Advertisement
Quick Links
InsTAllATIon guIde
INSTRUCCIONES DE INSTALACIÓN
KDS 3232 / 3636
142018 / 142019 / 142024 / 142025
Base only | Base seulement | Base solamente
142020 / 142021 / 142026 / 142027
KDTS 2954 / 3060 / 3260
142000 142001 / 142006 142007 / 142012 142013
Bathtub only | Baignoire seulement | Bañera solamente
142002 142003 / 142008 142009 / 142014 142015
These guidelines are recommended by MAAX Bath Inc. (here-
after "MAAX") for the proper installation of their products.
A careful review of these procedures (and any referenced publica-
tions) before starting is important in avoiding unnecessary problems
resulting in an improper assembly or installation.
KDS 3448 / 3060 / 3460
142030 142031/ 142036 142037 / 142042 142043
Base only | Base seulement | Base solamente
142032 142033 / 142038 142039 / 142044 142045
MAAX Bath Inc. (en adelante "MAAX") recomienda las siguientes
instrucciones para la correcta instalación de su producto. Antes de
comenzar, es importante leer detenidamente estos procedimientos
(y todas las publicaciones a las que se haga referencia), para evi-
tar problemas innecesarios que puedan resultar en un montaje o
instalación incorrectos.
10024651
Advertisement
Related Manuals for MAAX AKER KDTS 3060
Summarization of Contents
Introduction to Installation Guidelines
MAAX Installation Recommendations
Guidelines recommended by MAAX Bath Inc. for proper product installation to avoid issues.
Installer's Responsibilities and Notes
Code Compliance and Documentation
Installer must determine code compliance and retain all unit documentation for the homeowner.
Dimension Reference and Modifications
Published dimensions are for reference; critical measurements must be taken from the unit. Unauthorized changes void warranty.
Pre-Installation Inspection Process
Unit Inspection and Issue Resolution
Inspect unit upon receipt, notify supplier of issues, and resolve questions before installation.
Basic Module and Accessory Checks
Verify unit drain, surface condition, color match, and all options/accessories.
Unit Dimensional Guidelines
Diagram and Data for Unit Dimensions
Provides diagrams and a data table with critical dimensions for various MAAX models.
Installation Steps Overview
Factory Assembly and Reassembly
Units assembled for shipping must be disassembled and reassembled per manual instructions.
Framing Requirements and Safety
Guidelines for framing, unit interior safety, and surface protection during installation.
Water Supply and Drain Connections
Instructions for connecting water supply and drain systems, including leak checks.
Access for Plumbing and Pump
Requirement for adequate access space for plumbing and pump maintenance.
Step 1: Unit Preparation
Procedures for preparing the unit, including removing fasteners and marking.
Step 2: Base Installation
Instructions for drilling and fastening the unit base to the wall structure.
Step 3: Wall Assembly
Guidance on assembling the unit walls using positioning pins and bolt holes.
Step 4: Side Wall Installation
Instructions for applying silicone and installing the side walls.
Step 5: Finishing Guidelines
Procedures for securing walls, leveling the flange, and final finishing touches.
Optional Tile Adaptor Installation
Drilling and Securing the Tile Adaptor
Instructions for drilling and screwing the optional tile adaptor into place.
Tips for Installing Shower Doors
Measuring Door Openings
Measure the top and bottom openings before choosing a shower door.
Door Adjustment and Framing
Use adjustment mechanisms and file framing to fit the base radius.
Unit Surface Care and Cleaning
General Surface Care Warnings
Avoid abrasive cleaners and waxing the unit bottom; follow product instructions carefully.
Routine and Specific Cleaning Methods
Details methods for routine cleaning, soap deposits, stains, scale, mold, and adhesive removal.
Suction Item Removal Warning
Caution against leaving suction items on the unit floor to prevent surface damage.
Limited Warranty
General Warranty Terms and Product Coverage
Covers acrylic (25 yrs) and fiberglass (5 yrs) units, repair/replacement, and unauthorized warranty clauses.
Warranty Limitations and Exclusions
Lists conditions like misuse, accidents, chemical corrosion, and specific water issues that void the warranty.
Owner Responsibilities and Recommendations
Covers installer responsibility, access, professional installation, and product compatibility testing.
Limited Warranty (Continued)
Liability Exclusions and Disclaimers
Excludes liability for personal injury, consequential damages, and disclaims implied warranties.
Commercial & Display Product Warranty
Defines shorter warranty for commercial use and specific terms for display products.
Obtaining Warranty Service & Certifications
Outlines the process for service requests and lists product certifications.
Need help?
Do you have a question about the AKER KDTS 3060 and is the answer not in the manual?
Questions and answers