Dual XDVDN8290N Installation & Owner's Manual page 80

XDVDN8290N
General Operation - Multi-Zone Menu
Multi-Zone Menu Access
Touch Access Buttons
Rapid Dial
79
OPERATION
There are two methods to access the Multi-Zone menu
Press the MENU button on the front panel, then press Multi-Zone
•
Touch the upper left corner of the touch screen, then press Multi-Zone
•
13
12
11
10
9
8
Touch to set CD/DVD mode as the Multi-Zone mode, (CD/DVD must be inserted)
1
Touch to set SD mode as the Multi-Zone mode (SD card must be inserted).
2
Touch to set AUXILIARY A/V INPUT mode as the Multi-Zone mode.
3
Touch to access BLUETOOTH mode, (BLUETOOTH must be activated first). Refer
4
to page 21 for more details.
5
Touch to RETURN to previous screen.
Touch to set the Multi-Zone mode in STANDBY (Off).
6
Notes: When the Multi-Zone mode is set to STANDBY (Off), the video signal from
the 6.5" TFT is shown by default and the Multi-Zone audio is disabled.
Press and hold the MODE button on the front panel for more than 2
seconds to change the Multi-Zone mode from STANDBY (Off) to active.
7 Touch to set CAMERA mode as the Multi-Zone mode, if optional camera isn't
connected then "No Video Signal" will be displayed.
Touch to access SCREEN SETUP menu.
8
Touch to access GENERAL SETUP menu.
9
Touch to access ASP Config menu.
10
Touch to access CD/DVD SETUP menu, (CD/DVD must be inserted to function).
11
Touch to access MULTI-ZONE source menu.
12
Touch to access MAIN source menu.
13
RAPID DIAL can also control touch screen functions from the multi-zone menu
Select desired function rotating clockwise or counter-clockwise
•
Function will be outlined in yellow
•
Press to confirm/ENTER
•
1
2 3
6
7
4 5