Dual XDVDN8290N Installation & Owner's Manual page 11

XDVDN8290N OPERATION
Control Functions - Monitor Closed
Power On/Off Press to turn the unit on. Hold for 3 seconds to turn the unit off.
Mute Press MUTE to silence the audio, and will appear in the OSD (On Screen
Display). Press MUTE again to cancel.
AM/FM Mode - Hotkey Press AM/FM to select radio tuner mode. If the unit is already in tuner mode,
press AM/FM to select between FM1, FM2, FM3, and AM bands.
AS/PS Press AS/PS momentarily to start station PRESET SCAN function,
Press AS/PS for 2 seconds to start AUTO STORE station preset function in
current BAND.
Mode Press MODE to select between the unit's available modes, such as: Tuner,
DVD (which includes CD and MP3/WMA playback), Bluetooth, Camera, SD,
Navigation and Auxiliary inputs. Each time the MODE button is pressed the
next mode is chosen. Modes of operation are indicated on the OSD. Hold
the MODE button for 3 seconds to toggle the Multi-Zone feature on and
off. Please read the Multi-Zone section of the manual on page 79 for a full
explanation.
Menu Press MENU to display the main menu, along with the setup sub-menus.
Press MENU again to return to the current mode.
Rapid Dial Rotary Encoder Press to toggle between the Volume and Select functions. When idle, push
and hold for 3 seconds to enter the Audio Setup Menu.
Volume Normally, the rotary controls the volume, which is visible as a number from
0 to 40, to the right of the volume icon displayed on the screen. When the
icon is not displayed, turn the rotary to display the volume level. Turning the
rotary while the volume is muted will cancel the mute function.
Note: To program the default volume level (up to 20) when the unit is turned
on: turn the rotary to the desired level, then push and hold the rotary for 3
seconds to program the current volume level.
Select Turning the rotary while it's in select mode will allow you to perform various
functions and settings depending on the mode/screen displayed. Generally,
turning the rotary will let you move through the choices and pushing the
rotary will select the highlighted choice.
Navigation - Hotkey Press NAV to select Navigation mode.
10