General Operation - Dual XDVDN8190N Installation & Owner's Manual

XDVDN8190N

General Operation

Power On/Off
Optional Mode Selection
Audio Adjustment
(from front panel)
Audio Adjustment
(from remote)
15
OPERATION
Press PWR to turn the unit on. Hold for 3 seconds to turn the unit off.
Press MUTE to silence the audio;
Mute
Press MUTE again to cancel.
Press MODE to select between Tuner, Disc, Bluetooth, Camera, SD, Navigation
Mode
and Auxiliary inputs. Modes of operation are indicated in the OSD (On Screen
Display) and SD card (optional) must be connected/inserted to appear in the
MODE selection string.
Press the top left corner of the screen to display the OSD menu bar. Press
Tuner, Disc, Bluetooth, Camera, SD, Navigation or Auxiliary in the MAIN menu
page to select the desired source.
Adjust VOLUME using rotary encoder or the VOL +/- buttons (00-40).
Volume
Press volume knob momentarily to enter the Audio Adjustment menu. Press
volume knob momentarily to advance to desired parameter to be changed.
Turn volume knob Q or P to adjust to desired level. Press volume knob to
advance to next selection or press and hold to exit.
2-Channel Audio Settings
Press the SEL button. Press the p or q buttons on the remote to select an
item to be adjusted. Press t or u to adjust the desired setting. Press the ESC
button on the remote control to exit the audio control menu.
Note: The Bass and Treble levels are only adjustable when EQ is set to "User"
mode. The Loud function compensates for deficiencies in sound ranges at low
levels. When the Loud function is on, LOUD is displayed in the OSD.
will appear in the OSD (On Screen Display).
R F
L R
L
6-Channel Audio Settings
A djustable Range
ltem
Master Volume
Front Left Channel Volume -10 to +10
Front Right Channel Volume
-10 to +10
Rear Left Channel Volume -10 to +10
Rear Right Channel Volume
-10 to +10
Center Channel Volume -10 to +10
Subwoofer Volume -10 to +10
Note: 6-Channel audio is only
adjustable when "Full 6CH"
mode is selected. Refer to page
47 for more details.
00 to 40