Advertisement
Table of Contents
Rotary Cutter
RCR1242, RCR1248, RCR1260 & RCR1272
Table of Contents
!
Read the Operator's Manual entirely. When you see this symbol,
the subsequent instructions and warnings are serious - follow
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with standard unit.
For an Operator's Manual and Decal Kit in French or
Spanish Language, please see your Land Pride dealer.
326-047M
Operator's Manual
Printed 2/7/20
30287
Advertisement
Table of Contents
Related Manuals for Land Pride RCR1260
Summarization of Contents
Important Safety Information
Safety at All Times
General guidelines for safe operation and operator responsibility.
Tractor Shutdown & Storage
Procedures for safely shutting down and storing the tractor and implement.
Safety Labels
Instructions on maintaining, understanding, and replacing safety labels.
Introduction
Application
Describes the intended use and capabilities of the rotary cutter.
Using This Manual
Guidance on how to effectively use the operator's manual.
Owner Assistance
Information on obtaining support and service from dealers.
Section 1: Assembly & Set-up
Tractor Requirements
Specifies necessary tractor specifications for safe operation.
Dealer Preparations
Outlines initial assembly steps performed by the dealer.
Hitch & Tailwheel Assembly
Steps for assembling the hitch and tailwheel components.
Driveline Installation
Procedures for connecting and installing the driveline.
3-Point Hook-Up
Guidance on connecting the cutter to a tractor's 3-point hitch.
Driveline Hook-Up
Steps for connecting the driveline to the tractor and implement.
Check Driveline Collapsible Length
Instructions to verify driveline length to prevent damage.
Section 2: Accessories
Replaceable Skid Shoes (Accessory)
Details on installing and replacing skid shoes for wear protection.
Section 3: Adjustments
Deck Leveling & Cutting Height
Primary adjustments for proper cutter operation and cutting performance.
Cutting Height Adjustment
Procedures for setting the desired cutting height.
Tailwheel Height Adjustment
Adjusting the tailwheel to set deck slope.
Section 4: Operating Procedures
Operating Checklist
Pre-operation checks to ensure safety and readiness.
Tractor Shutdown Procedure
Steps for safely shutting down the tractor and implement.
Field Operation
Best practices for operating the cutter in the field.
General Operating Instructions
Comprehensive guidance for safe and effective operation.
Section 5: Maintenance & Lubrication
Maintenance
General advice on upkeep for implement longevity.
Clutch Run-In
Procedure to break in the clutch for proper function.
Cutter Blade Maintenance
Guidance on inspecting, sharpening, and replacing blades.
Lubrication Points
Identifies all lubrication points and their intervals.
Gearbox
Maintenance and lubrication instructions for the gearbox.
Need help?
Do you have a question about the RCR1260 and is the answer not in the manual?
Questions and answers