Related Manuals for Nice WIDEL
Summarization of Contents
General Warnings and Safety Instructions
Installation Precautions
Essential precautions for safe and correct installation of the barrier mechanism.
European Directives and Essential Requirements
Special Warnings for European Directives
Warnings related to Construction Products, Machinery, Low Voltage, and EMC directives.
Installation Criteria and Essential Requirements
Installation criteria and warnings for essential requirements of directives and standards.
Product Description and Intended Use
Installable Accessories
List of accessories available for installation with the WIDE barrier.
Application Limits
Product Durability
Factors influencing product durability and how to estimate its lifespan.
Installation Guide
Package Contents
Contents of the package based on the purchased model.
Installation Components Overview
Location of components for a typical installation using Nice accessories.
Fixing the Barrier Mechanism Cabinet
Steps for fixing the barrier mechanism cabinet to the foundation plate.
Setting the Boom Direction
Instructions on setting the boom direction (left or right orientation).
Adjusting the Balancing Spring
How to adjust the balancing spring for different WIDE S models.
Boom Assembly Procedures
Instructions for assembling one-piece and two-piece booms.
Mechanical Limit Stop Adjustment
How to adjust the mechanical stops for the limit switches.
Balancing Adjustment for WIDE L Models
Adjusting the boom balance for WIDE L models based on boom length.
Electrical Connections
Electrical Cable Types
Details on the types of electrical cables required and their maximum lengths.
Control Unit Electrical Connections
Description of electrical connections to the control unit terminals.
Starting and Checking the Automation
Connecting to Mains Power
Procedures for connecting the automation to the main power supply.
Testing and Commissioning
Testing Procedures
Procedures for testing various components and functions of the automation system.
Commissioning Procedures
Steps for final commissioning after all tests are successfully completed.
Programming the Control Unit
Control Unit Overview
Overview of the control unit, micro-switches, and trimmers for programming functions.
Programmable Functions via Micro-switches
Details on micro-switches and their functions for programming the automation.
Further Details and Accessories
Connecting a Radio Receiver
Instructions for connecting a radio receiver to the control unit.
Powering External Devices
Connecting external devices like receivers or key switches to the control unit.
Connecting Boom Lights
Procedures for connecting boom lights to the barrier mechanism.
Connecting Photocell Sensors
Installing TX or RX photocells inside the barrier mechanism cabinet.
Connecting the Back-up Battery
Instructions for installing the PS324 back-up battery into the control unit.
Maintenance Schedule and Register
Maintenance Operations Checklist
Details on periodic checks and operations for system efficiency and safety.
Operation Manual for End User
End User Safety and Usage Precautions
Critical safety warnings and usage guidelines for the end user.
Manual Gearmotor Operation
How to manually operate the gearmotor in case of power failure or malfunction.
Need help?
Do you have a question about the WIDEL and is the answer not in the manual?
Questions and answers