Helmer Scientific Horizon HLR105-GX Instructions For Use And Operation Manual

Helmer Scientific Horizon HLR105-GX Instructions For Use And Operation Manual

Upright - undercounter, laboratory/blood bank/pharmacy

Advertisement

Laboratory
i.Series
iLR105-GX, iLR113-GX, iLR120-GX,
iLR125-GX, iLR245-GX, iLR256-GX
Horizon Series
HLR105-GX, HLR113-GX, HLR120-GX,
HLR125-GX, HLR245-GX, HLR256-GX
Blood Bank
i.Series
iBR105-GX, iBR113-GX, iBR120-GX,
iBR125-GX, iBR245-GX, iBR256-GX
Horizon Series
HBR105-GX, HBR113-GX, HBR120-GX,
HBR125-GX, HBR245-GX, HBR256-GX
Pharmacy
i.Series
iPR105-GX, iPR113-GX, iPR120-GX,
iPR125-GX, iPR245-GX, iPR256-GX
Horizon Series
HPR105-GX, HPR113-GX, HPR120-GX,
HPR125-GX, HPR245-GX, HPR256-GX
Refrigerator Instructions for Use
and Operation Manual
®
i.Series
· Horizon Series™
Upright - Undercounter
360414/A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Horizon HLR105-GX and is the answer not in the manual?

Questions and answers

Summarization of Contents

About this Manual
Intended Audience
Specifies the intended users for this manual, including end users and technicians.
Model Reference
Explains how model numbers indicate series, type, doors, and capacity.
Intended Use
Details the product's compliance with FCC rules and its intended use for medical/scientific products.
Safety Precautions and Symbols
Lists symbols used in the manual and on the unit to convey critical safety information and procedures.
Avoiding Injury
Provides crucial safety guidelines to prevent harm during operation and maintenance.
General Recommendations
Offers advice on initial setup, product loading, and operational best practices.
Installation
Location
Specifies requirements for unit placement, including ventilation, sunlight, and temperature.
Placement and Leveling
Details procedures for moving, positioning, and leveling the refrigerator unit.
Stacked Undercounter Units
Provides instructions for safely stacking undercounter units, including bracing.
AC Power Cord
Instructions for connecting the manufacturer-supplied power cord to the unit and outlet.
Temperature Probes
Details the function and handling of temperature probes, including primary and secondary probes.
Chart Recorder (if included)
Information on installing, setting up, and operating the optional chart recorder.
i.Series® Operation
Initial Power-Up
Guides users through the initial steps of powering on the i.Series refrigerator and its display.
Operation
Explains how to navigate the i.C³ interface, including home and screensaver functions.
Change Temperature Setpoint
Details how to modify the temperature setpoint using the i.C³ interface and password.
Set Alarm Parameters
Guides users on configuring high/low temperature and other alarm setpoints and delays.
Active Alarms
Lists and describes various active alarms that may occur on the i.Series refrigerator.
Mute Active Alarms
Explains how to temporarily mute audible alarms and set the delay duration.
Light Operation (if installed)
Instructions on using the LED light via the control panel and configuring auto ON/OFF.
i.Series® Access Control (Optional)
Setup
Guides on configuring and managing user-specific accounts for refrigerator access.
Open Refrigerator with Access Control
Details the procedure for entering a valid PIN to unlock and access the refrigerator.
Horizon Series™ Operation
Initial Power-Up
Steps for powering on the Horizon Series refrigerator, including battery and alarm switch.
Display Minimum and Maximum Monitor Temperature Recordings
Instructions on viewing minimum and maximum temperature occurrences and their timing.
Change Temperature Setpoint
Guides on modifying the temperature setpoint for HBR, HLR, and HPR Horizon Series models.
Set Parameter Values
Details how to enter program mode and set various parameters like temperature units and alarms.
Set Temperature Units
Instructions for changing temperature display units between Celsius and Fahrenheit.
Set Alarm Setpoints (Parameters)
Guides on adjusting high and low temperature alarm setpoints and time delays.
Temperature Calibration Offsets
Explains calibration offsets and advises against changing control sensor offset and rail limits.
Active Alarms
Lists and describes various active alarms for the Horizon Series refrigerator.
Mute and Disable Audible Alarms
Explains how to mute audible alarms using the mute button or disable them with a key.
Light Operation
Details the location and function of the light switch controlling the chamber LED light.
Horizon Series™ Access Control (Optional)
Setup
Guides on programming the keypad, adding, deleting, and managing user codes.
Open Refrigerator with Access Control
Details the procedure for entering the user code and pressing '#' to unlock the refrigerator.
Product Specifications
Operating Standards
Lists environmental conditions, altitude, temperature, and humidity ranges for unit operation.
Compliance
Safety Compliance
Details compliance with Medical Devices directive, UL, CSA, and IECEE CB Scheme standards.
Environmental Compliance
Covers compliance with RoHS and WEEE directives for hazardous substances and electronics disposal.
EMC Compliance
States compliance with IEC61326, EN55011, and FCC regulations for electromagnetic compatibility.

Table of Contents