Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for DAL-BO MaxiCut 600
Summarization of Contents
Safety
General Safety Precautions
General safety instructions for operating the machine, including familiarization and rider policy.
Correct Use and Liability
Transport Checks and Weight Limits
Checks for transport on public roads, including traffic authorities and tractor weight limits.
Technical Data
Oil Return Volume Specification
Table indicating oil volume returning to the tractor when MaxiCut is extended.
How to Use This Manual
Manual Structure Overview
Outlines the 5 main sections of the manual for user orientation.
Safety Symbols Explanation
Explains the meaning of symbols used in the manual for safety and functionality.
Uses and Operation Description
Operating Speed and Conditions
Recommends high operating speeds and optimal ground conditions for effective use.
Roller Filling with Water
Explains rollers are delivered empty and can be filled with water, with density limits.
Connecting and Disconnecting the MaxiCut
Hydraulic Connection Procedure
Details the requirement for a double-acting hydraulic outlet and hose markings.
Disconnection Procedure
Steps for disconnecting the machine, including fitting the support leg and hoses.
Setting Up the MaxiCut
Adjusting the Drawbar
Instructions for adjusting the drawbar to ensure uniform cutting and correct soil pressure.
Operation of the MaxiCut
Extending and Retracting Sections
Step-by-step instructions for extending the machine's side sections.
Retracting Side Sections
Instructions for retracting the machine's side sections.
Floating Position Requirement
Specifies the need for the lift to be in a floating position during operation.
Maintenance Overview
Lubrication Points and Intervals
Details lubrication points, number of nipples, intervals, and illustration references.
Adjustments and Wear Parts
Wheel Bearing Adjustment Procedure
Step-by-step guide for lubricating and adjusting wheel bearings.
Wear Parts: Blade Replacement
Information on blade fitting, replacement, and protective plates.
Hydraulic System Maintenance
Checks for hydraulic hoses and lubrication of exposed rams for storage.
Replacement and Repairs
Replacing Extend Cylinder for Side Sections
Procedure for replacing the extend cylinder for retracting side sections.
Wheel Removal and Fitting
Replacing Wheel Bearings
Step-by-step guide for removing and fitting wheel bearings and associated components.
Removing Blade Roller
Replacing Blade Roller Bearings
Procedure for replacing bearings in the blade roller, including safety precautions.
Fitting Bearings
Instructions for fitting bearings into the axle and securing them with bolts.
Replacing Blades
Fitting Blades
Instructions for fitting new blades with carriage bolts and protective plates.
Need help?
Do you have a question about the MaxiCut 600 and is the answer not in the manual?
Questions and answers