Adjustment Using The Menus; Items - Sony LMD-1420 Operating Instructions Manual

LMD-1420/2020
U S E R C O N F I G ( 1 / 2 ) R r
· R G B / C O M P S E L
· C O M P
· N T S C
· G A M M A
· F O R M AT
xL A N G U A G E
3
Select an item.
Use the M or m button to select the item, then press
the , or ENTER button.
The item to be changed is displayed in yellow.
Note
If the menu consists of multiple pages, press M or
m to go to the desired menu page.
4
Make the setting or adjustment on an item.
When changing the adjustment level:
To increase the number, press the M button.
To decrease the number, press the m button.
Press the ENTER button to confirm the number,
then restore the original screen.
When changing the setting:
Press the M or m button to change the setting.
Press the ENTER button to confirm the setting.
Notes
• An item displayed in blue cannot be accessed.
You can access the item if it is displayed in white.
• If the key inhibit has been turned on, all items are
displayed in blue. To change any of the items,
turn the key inhibit to OFF first.
For details on the key inhibit, see page 25.
To clear the menu
Press the MENU button.
The menu disappears automatically if a button is not
pressed for one minute.
About the memory of the settings
The settings are automatically stored in the monitor
memory.
To reset items that have been adjusted
Pressing the RESET button while you are adjusting any
of the menu items resets the menu item to the previous
setting.
22

Adjustment Using the Menus

xxxx
L E V E L xxxxx
S E T U P x
x
D I S P xxxx
E N G L I S H
Adjustment Using the
Menus

Items

The screen menu of this monitor consists of the
following items.
STATUS (the items indicate the
current settings.)
FORMAT
COLOR TEMP
GAMMA
COMP LEVEL
NTSC SETUP
RGB/COMP SEL
SCAN MODE
DISPLAY
OPTION
COLOR TEMP/BAL
COLOR TEMP
MANUAL ADJ
USER CONTROL
CONTROL
USER CONFIG
RGB/COMP SEL
COMP LEVEL
NTSC SETUP
GAMMA
FORMAT DISP
LANGUAGE
MARKER (LMD-1420/2020 only)
CENTER MARKER (LMD-1420/2020 only)
SAFETY AREA (LMD-1420/2020 only)
MARKER LEVEL (LMD-1420/2020 only)
MARKER MAT (LMD-1420/2020 only)
SCAN (LMD-1420/2020 only)
PIC DELAY MIN