Toro FLX55 Series Installation And Service Instructions Manual

Introduction
The FLX35 and FLX55 series full and part circle rotary sprinklers
are designed specifically for golf course applications.
Manufactured from durable, high-strength engineering plastic and
stainless-steel components, these sprinklers incorporate many
innovative and time-proven features for lasting, maintenance-free
operation.
Prior to installing the sprinkler, read through the recommended
installation and start-up procedures. Please observe all Warnings
and Cautions when installing and operating this equipment.
Features
• Adjustable Part circle (40°-330°) and true uni-directional full circle (360°) arc coverage
• Arc adjustment in 5° increments
• Dual trajectory main nozzle adjustment – 25° standard or 15° low angle
• Ratcheting riser in 2° increments
• Nozzle base clutching
• Two back nozzle positions
• Industry's largest precision nozzle selection
• All nozzles are color coded, debris tolerant and threaded in from the front
• Five electric and two hydraulic activation types
o Electric – Satellite systems – Standard 24 VAC solenoid; SPIKEGUARD 24VAC solenoid; Nickel plated
SPIKEGUARD 24VAC solenoid
o Electric – 2-wire systems – DC Latching solenoid; Integrated GDC module w/DC latching solenoid
o Hydraulic – Normally Open valve in head; Check-O-Matic (requires remote valve)
• Constant velocity drive and variable stator provide consistent rotation speeds
• Manual control at the sprinkler ON-OFF-AUTO (electric models only)
• Selectable/lockable pressure regulation settings; 50 psi (3,4 bar), 65 psi (4,5 bar), 80 psi (5,5 bar) or 100 psi (6,9 bar)
• Indestructable stainless steel valve seat and valve communication tube
• Body inlet rock screen serviceable from the top
• All internal components are serviceable from the top of the sprinkler
Specifications and Performance/Application Data
FLX35 Series
Radius: 43'–83' (13,1–25,3 m)
•
Flow Rate: 8.2–47.3 GPM (31–179 LPM)
•
Trajectory: Selectable 15° or 25°
•
Arc: Full Circle (360°) or adjustable part circle (40°–330°)
•
Recommended Operating Pressure:
•
65–100 PSI (4,5–6,9 Bar)
Minimum Pressure: 40 PSI (2,8 Bar)
•
Maximum Pressure: 150 PSI (10,3 Bar)
•
Precipitation Rate:
•
Minimum: 0.43"/hr (10,9 mm/hr)
Maximum: 0.76"/hr (19,3 mm/hr)
Body Height: 10" (254 mm)
•
Pop-Up Height to Nozzle: 4 3/16" (106 mm)
•
• Inlet Size: 1" (25 mm) NPT, BSP or ACME
• Five electric activation types:
Standard Solenoid - 24 VAC, 50/60 Hz,
0.30 Amps Inrush, 0.20 Amps Holding
SPIKEGUARD Solenoid - 24 VAC, 50/60 Hz,
0.12 Amp Inrush, 0.10 Amp Holding
Nickel Plated SPIKEGUARD Solenoid - 24 VAC, 50/60 Hz,
0.12 Amp Inrush, 0.10 Amp Holding
DC Latching Solenoid - Momentary Low Voltage Pulse
Integrated GDC Module w/ DC Latching Solenoid -
Momentary Low Voltage Pulse
• Manual Control (Electric only): On-Off-Auto
• Check-O-Matic Model checks up to 37' (11,2 m) of elevation
• Eight Nozzle Variations
FLX35 & FLX55 Series Rotary Sprinklers
Installation and Service Instructions
FLX55 Series
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Radius: 55'–92' (16,8–28 m)
Flow Rate: 14.1–61.3 GPM (53,4–232 LPM)
Trajectory: Selectable 15° or 25°
Arc: Full Circle (360°) or adjustable part circle (40°–330°)
Recommended Operating Pressure:
65–100 PSI (4,5–6,9 Bar)
Minimum Pressure: 40 PSI (2,8 Bar)
Maximum Pressure: 150 PSI (10,3 Bar)
Precipitation Rate:
Minimum: 0.45"/hr (11,4 mm/hr)
Maximum: 0.94"/hr (23,9 mm/hr)
Body Height: 11" (289 mm)
Pop-Up Height to Nozzle: 4 3/16" (106 mm)
Inlet Size: 1.5" (40 mm) NPT, BSP or ACME
Five electric activation types:
Standard Solenoid - 24 VAC, 50/60 Hz,
0.30 Amps Inrush, 0.20 Amps Holding
SPIKEGUARD Solenoid - 24 VAC, 50/60 Hz,
0.12 Amp Inrush, 0.10 Amp Holding
Nickel Plated SPIKEGUARD Solenoid - 24 VAC, 50/60 Hz,
0.12 Amp Inrush, 0.10 Amp Holding
DC Latching Solenoid - Momentary Low Voltage Pulse
Integrated GDC Module w/ DC Latching Solenoid -
Momentary Low Voltage Pulse
Manual Control (Electric only): On-Off-Auto
Check-O-Matic Model checks up to 37' (11,2 m) of elevation
Nine Nozzle Variations