Toro FLX34 Series Installation And Service Instructions Manual

Introduction
The FLX34 and FLX54 series full-circle rotary sprinklers are
designed specifically for golf course applications.
Manufactured from durable, high-strength engineering plastic and
stainless-steel components, these sprinklers incorporate many
innovative and time-proven features for lasting, maintenance-free
operation.
Prior to installing the sprinkler, read through the recommended
installation and start-up procedures. Please observe all Warnings
and Cautions when installing and operating this equipment.
Features
• Full circle (360°) arc coverage
• Dual trajectory main nozzle adjustment – 25° standard or 15° low angle
• Two additional front nozzle positions
• Industry's largest precision nozzle selection
• All nozzles are color coded, debris tolerant and threaded in from the front
• Five electric and two hydraulic activation types
o Electric – Satellite systems – Standard 24 VAC solenoid; SPIKEGUARD 24VAC solenoid; Nickel plated
SPIKEGUARD 24VAC solenoid
o Electric – 2-wire systems – DC Latching solenoid; Integrated GDC module w/DC latching solenoid
o Hydraulic – Normally Open valve in head; Check-O-Matic (requires remote valve)
• Constant velocity drive and variable stator provide consistent rotation speeds
• Manual control at the sprinkler ON-OFF-AUTO (electric models only)
• Selectable/lockable pressure regulation settings; 50 psi (3,4 bar), 65 psi (4,5 bar), 80 psi (5,5 bar) or 100 psi (6,9 bar)
• Indestructable stainless steel valve seat and valve communication tube
• Body inlet rock screen serviceable from the top
• All internal components are serviceable from the top of the sprinkler
Specifications and Performance/Application Data
FLX34 Series
Radius: 52'–91' (15,8–27,7 m)
•
• Flow Rate: 13–46.9 GPM (49,2–177,5 LPM)
Trajectory: Selectable 15° or 25°
•
• Arc: Full Circle (360°)
Recommended Operating Pressure:
•
65–100 PSI (4,5–6,9 Bar)
Minimum Pressure: 40 PSI (2,8 Bar)
•
Maximum Pressure: 150 PSI (10,3 Bar)
•
• Precipitation Rate:
Minimum: 0.39"/hr (9,9 mm/hr)
Maximum: 0.79"/hr (20,1 mm/hr)
• Body Height: 10" (254 mm)
Pop-Up Height to Nozzle: 4 3/16" (106 mm)
•
• Inlet Size: 1" (25 mm) NPT, BSP or ACME
Five electric activation types:
•
Standard Solenoid - 24 VAC, 50/60 Hz,
0.30 Amps Inrush, 0.20 Amps Holding
SPIKEGUARD Solenoid - 24 VAC, 50/60 Hz,
0.12 Amp Inrush, 0.10 Amp Holding
Nickel Plated SPIKEGUARD Solenoid - 24 VAC, 50/60 Hz,
0.12 Amp Inrush, 0.10 Amp Holding
DC Latching Solenoid - Momentary Low Voltage Pulse
Integrated GDC Module w/ DC Latching Solenoid -
Momentary Low Voltage Pulse
Manual Control (Electric VIH only): On-Off-Auto
•
Check-O-Matic Model checks up to 37' (11,2 m) of elevation
•
Seven Nozzle Variations
•
FLX34 & FLX54 Series Rotary Sprinklers
Installation and Service Instructions
FLX54 Series
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Radius: 52'–99' (15,8–30,2 m)
Flow Rate: 13.2–61.8 GPM (50–234 LPM)
Trajectory: Selectable 15° or 25°
Arc: Full Circle (360°)
Recommended Operating Pressure:
65–100 PSI (4,5–6,9 Bar)
Minimum Pressure: 40 PSI (2,8 Bar)
Maximum Pressure: 150 PSI (10,3 Bar)
Precipitation Rate:
Minimum: 0.38"/hr (9,7 mm/hr)
Maximum: 0.77"/hr (19,6 mm/hr)
Body Height: 11" (289 mm)
Pop-Up Height to Nozzle: 4 3/16" (106 mm)
Inlet Size: 1.5" (40 mm) NPT, BSP or ACME
Five electric activation types:
Standard Solenoid - 24 VAC, 50/60 Hz,
0.30 Amps Inrush, 0.20 Amps Holding
SPIKEGUARD Solenoid - 24 VAC, 50/60 Hz,
0.12 Amp Inrush, 0.10 Amp Holding
Nickel Plated SPIKEGUARD Solenoid - 24 VAC, 50/60 Hz,
0.12 Amp Inrush, 0.10 Amp Holding
DC Latching Solenoid - Momentary Low Voltage Pulse
Integrated GDC Module w/ DC Latching Solenoid -
Momentary Low Voltage Pulse
Manual Control (Electric VIH only): On-Off-Auto
Check-O-Matic Model checks up to 37' (11,2 m) of elevation
Nine Nozzle Variations