Related Manuals for HP K-Class Series
Summarization of Contents
I/O Upgrade
Introduction
Provides an overview of available I/O upgrades for HP 3000/9x9KS and HP 9000 computer systems.
Electrostatic Discharge
Backplane Card Slot Color Codes
Explains the color coding of backplane slots for identifying different I/O and processor cards.
Tools required
Anti-Static Wrist Strap
Describes the anti-static wrist strap and its connection for ESD protection.
Anti-Static Mat
Explains the use of anti-static mats for preventing ESD during upgrades.
HP-PB Upgrade
HP-PB Upgrade Procedures
Step-by-step instructions for performing the HP-PB I/O upgrade, including safety precautions.
HP-HSC Upgrade
HP-HSC Configuration Rules
Outlines configuration rules and considerations before performing HP-HSC I/O upgrades.
HP-HSC Configuration Guidelines
Provides guidelines for system configurations and memory requirements for HP-HSC upgrades.
Primary Expansion I/O Upgrade Procedures
Details the procedure for installing primary expansion I/O cards in HP-HSC slots.
Secondary Expansion I/O Upgrade (Dual Bus) Procedures (K5x0 Only)
Instructions for performing secondary expansion I/O upgrades on K5x0 systems.
Moving HP-HSC Cards
Describes how to swap or move HP-HSC cards between different slots.
Upgrade Verification
Steps to verify the successful installation and configuration of HP-HSC upgrades.
Need help?
Do you have a question about the K-Class Series and is the answer not in the manual?
Questions and answers