Advertisement
Quick Links
Kreg Pocket-Hole Jig Owner's Manual
Guide d'utilisation du gabarit pour perçage à angle de Kreg
Manual del propietario de la plantilla de cavidad oculta Kreg
Manual applies to
Item # KPHJ310 and KPHJ320
Ce manuel concerne
les articles #KPHJ310 et #KPHJ320
El manual es apto para
Artículos #KPHJ310 y #KPHJ320
4/2019 NK9398
V1
kregtool.com
Advertisement
Related Manuals for Kreg KPHJ320
Summarization of Contents
Safety Guidelines and Precautions
General Safety Precautions
Essential safety rules for using the Kreg Jig with power tools, including protective gear and secure workpieces.
California Proposition 65 Warning
Warning about exposure to chemicals like Acrylonitrile known to cause cancer and reproductive harm.
Wood Dust Hazard Warning
Warning about wood dust exposure from woodworking, known to cause cancer, and recommending protective measures.
Setting Up Your Kreg Jig for Drilling
Measure Material Thickness
Instructions on measuring the material's thickness to set up the jig correctly.
Set Stop Collar to Material Thickness
Guidance on adjusting the stop collar on the drill bit to match the material thickness.
Position Material Thickness Stop
Steps for placing and securing the material thickness stop on the jig for accurate drilling.
Drilling and Driving Pocket-Hole Screws
Clamp Jig and Drill Pocket Hole
Procedure for securing the Kreg Jig to the workpiece and drilling the pocket hole.
Clamp Joint Before Driving Screws
Instructions on clamping the joint securely before inserting screws for a better finish.
Drive Pocket-Hole Screws
Steps for correctly driving pocket-hole screws until fully seated without over-driving.
Using Kreg Jig in Different Configurations
Reconfigure Jig for Standard Operation
Process for reconfiguring the Kreg Jig for standard pocket-hole drilling.
Reconfigure Jig with Drill Spacer
Steps to reconfigure the Kreg Jig when using the drill spacer.
Recommended Hole Spacing
Narrow Pieces Hole Spacing
Recommended hole spacing configurations for narrow workpieces.
Wide Pieces Hole Spacing
Recommended hole spacing configurations for wide workpieces.
Using the Universal Clamp Pad Adapter
Secure Clamp in Adapter
Procedure to position and secure a clamp within the universal clamp pad adapter.
Align Adapter Anchor in Drill Guide
Steps for seating the adapter's rubber anchor correctly in the drill guide.
Ensure Chip Ejection Clearance
Instruction to avoid blocking the chip ejection hole when using the adapter.
Using Kreg Jig in Repair Applications
Remove Material Thickness Stop for Repairs
Instruction to remove the material thickness stop when performing repairs.
Determine Jig Placement for Repairs
Guidance on positioning the jig on workpieces for repair applications.
Clamp and Drill for Tight Spots
Methods for clamping and drilling pocket holes in tight spaces during repairs.
Need help?
Do you have a question about the KPHJ320 and is the answer not in the manual?
Questions and answers