Numbers For Voice, Fax And Data (7-2-4); Cost Settings (7-3-7) - ASCOM 21 User Manual

Numbers for voice, fax and data (7-2-4)

If you have obtained more than one mobile
phone number from your service provider
and the SIM card supports this, you can store
different mobile phone numbers for voice,
data and fax calls on the SIM card as a re-
minder.

Cost settings (7-3-7)

To keep control over your call costs, you may
set a charge rate, i.e. an amount of money
(in some currency) per call unit, and an accu-
mulated call cost limit (expressed as a num-
ber of call units or as an amount of money).
Furthermore, you may select whether or not
the cost will be displayed at the end of a call.
You can make charge settings for:
Charge Rate
– (7-3-7-1)
You can choose to display cost just in
number of units in a currency. If you
want to display cost in currency you need
to enter a charge rate per unit.
Cost limit
– (7-3-7-2)
You can define a cost limit; the mobile
phone will suspend service when the cost
limit is reached.
Cost displayed
– (7-3-7-3)
Cost information will be displayed after
finishing a call. This function depends on
the functionality of the network and can
be switched off or on.
You may also display cost statistics and the
amount of remaining credit; see page 48.
To store numbers for services:
Menu > Settings > Phone >
Select
Own Number > Voice
Enter the number
Save
Press
}
Set charge rate
Menu > Settings > Call > Cost >
Select
Charge Rate
The current setting is displayed
Change
Press
Enter PIN2
OK
Press
Select the currency
Enter the currency symbol
Save
Press
Enter the desired charge rate per unit
For the decimal point use the *
Save
Press
}
Set cost limit
Settings > Call > Cost > Cost Limit
Select
The current setting is displayed
Change
Press
Enter PIN2
OK
Press
Enter the desired cost limit
Save
Press
}
Switch display of cost on/off
Settings > Call > Cost >
Select
Cost Displayed
The current setting is displayed
Change
Press
Save
Press
Fax Data
or or
37