Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Hardi MEGA 350
Summarization of Contents
Safety Information for Sprayer Operation
Follow Safety Instructions
Read all safety messages and labels, keep them in good condition.
Operating the Sprayer Safely
Follow safety precautions before, during, and after operation.
Handling Chemical Products Safely
Take precautions when handling hazardous chemicals, use protective clothing.
Local Poison Information Center
Provides space to list poison control center phone number and chemicals.
Assembling the Mega Sprayer
Lifting Points
Details on where to lift the sprayer during loading/unloading.
Preparing Wings for Installation
Instructions for securing boom sections before installation.
Installing Boom Wings
Steps for attaching boom wings to the center frame.
Mounting Hydraulic Hoses
Guidance on connecting hydraulic hoses to fold and tilt cylinders.
Installing Center Frame Spray Tube Assembly
Instructions for attaching spray tube assembly to the center frame.
Adjusting Center Cables
Procedure for adjusting center cables for frame squareness and boom folding.
Attaching Feed Hoses - Three Valve System
Steps for routing and connecting feed hoses to control valves.
Performing Final Inspection
Checklist for final checks after assembly.
Mounting the Mega Sprayer
Dismounting The Mega Sprayer
Steps for safely removing the sprayer from the tractor.
P.T.O. Shaft Operator Safety
Critical safety warnings for PTO shaft handling and operation.
Installation Of P.T.O. Shaft
Guide for installing and shortening the PTO shaft.
Hydraulic Requirements with Eagle Boom
Specifies hydraulic outlet and oil capacity requirements for the boom.
Hydraulic Hook-Up
Instructions for correctly connecting hydraulic lines to the tractor.
HZ Hydraulics
Diagram and notes for HZ model hydraulic connections.
Installation of Handle
Guidance on attaching the control handle to the tractor's hydraulic lever.
Electric Hook-Up of Handle
Instructions for connecting the handle's electrical plug to the tractor.
Control Box for ESC-Controls
Instructions for mounting and wiring the ESC control box in the tractor cab.
Operating Instructions
Filling the Main Tank
Procedure for filling the main sprayer tank with water.
Filling the Flush Tanks
Instructions for filling the flush tanks if they are fitted.
Standard Sprayer Plumbing Diagram
Diagram illustrating the sprayer's plumbing system with optional components.
Operating The Mega Boom
General guidelines for operating the boom, ensuring safety and proper hitching.
Unfolding & Folding The Boom (HY Hydraulics)
Step-by-step guide for unfolding and folding the boom on HY models.
Unfolding and Folding Boom (HZ Hydraulics)
Step-by-step guide for unfolding and folding the boom on HZ models.
Tilting Boom (HZ-Models Only)
Instructions for tilting the boom on HZ model sprayers.
Operation Of The ESC Controls
Explains the function of the ESC controls for boom pressure and section control.
Agitation Adjustment
How to adjust agitation flow to ensure proper mixing of the solution.
Manifold System
Description of the manifold system for operating accessories and valve identification.
Manifold System Operating Instructions
Guide on how to operate various accessories using the manifold system.
Agitation Bypass Valve Operation (Optional)
Operation of the optional agitation bypass valve for tank drainage.
Operation of the Tank Drain Valve
Procedure for draining the sprayer tank safely and correctly.
Nozzle Selection
Guidance on selecting appropriate nozzles for different applications.
Calibration
Detailed instructions on calibrating the sprayer for accurate application rates.
Maintenance Procedures
Cleaning the Sprayer
Guidelines and procedures for cleaning the sprayer after use.
Filters
Information on cleaning and checking suction and pressure filters.
Lubrication
Recommended lubrication points and intervals for the sprayer.
Greasing the H-Frame and Center Frame
Procedures for greasing the H-frame and center frame wear surfaces.
Greasing the Boom
Instructions for greasing grease zerts on the boom sections.
Lubrication of Chain and Sprocket
How to lubricate the chain and sprocket at the boom hinge points.
Greasing the Breakaway Clutch
Procedure for greasing the breakaway clutch assembly.
Maintenance of Triplets (When Fitted)
Instructions for cleaning and maintaining triplet assemblies.
Adjustments and Maintenance Intervals
Adjustment & Maintenance Intervals
Important intervals for retightening fasteners and inspecting boom.
Checking and Adjusting Sprocket Timing
How to check and adjust the timing chain and sprocket.
Aligning Wing Assemblies
Procedure for aligning wing assemblies with the center frame.
Aligning Intermediate and Outer Boom Sections
Steps to align boom sections for proper operation.
Adjusting Front Fold Cables
Guide for adjusting front fold cables for correct boom deflection.
Adjusting Breakaway Clutch Tension
How to adjust the breakaway clutch tension for proper alignment.
Adjusting Boom Wing to be Level
Instructions for leveling the boom wings to the ground.
Adjusting Floating Frame Pivot
How to adjust the floating frame pivot for smooth boom return.
Adjusting Boom Transport Position
Procedure for adjusting boom sections for transport.
Adjusting Rear Cable
Instructions for adjusting the rear cable for boom transport stability.
Operational Problems and Checks
Nozzle Tubes and Fittings
Common issues with nozzle tubes and fittings and their causes.
Checking the Valve Cone in Distribution Valves
How to check distribution valves for proper sealing.
Troubleshooting Sprayer Systems
General Spray Systems
Troubleshooting common problems with the general spray system.
Foam Marker
Troubleshooting issues related to the foam marker system.
Flush & Rinse™
Troubleshooting problems with the flush and rinse system.
Chemical Filler
Troubleshooting issues specific to the chemical filler.
Hydraulics
Troubleshooting hydraulic system problems for HY/HZ models.
HY-Schematic
Troubleshooting guide with schematic for HY boom hydraulics.
HZ-Schematic
Troubleshooting guide with schematic for HZ boom hydraulics.
Available Accessories
Chemical Filler
Description of the chemical filler accessory.
Chemical Filler Rinse Kit
Description of the rinse kit for the chemical filler.
Flush System
Description of the flush system for cleaning the sprayer.
Tank Rinse System
Description of the tank rinse system for cleaning the main tank.
Foam Marker System
Description of the foam marker system for preventing skips and overlaps.
Nurse Tank Quick Fill
Description of the quick fill system for filling from a nurse tank.
Front Tank
Description of the optional front tank accessory.
Suction Filter
Description of the suction filter and its maintenance.
Agitation Shut-Off Valve
Description of the agitation shut-off valve.
Need help?
Do you have a question about the MEGA 350 and is the answer not in the manual?
Questions and answers