Related Manuals for MYERS Illuminator IE Series
Summarization of Contents
CHAPTER 2 INTRODUCTION
Qualified Personnel Warning
Warning that only qualified electricians should perform installation and startup.
CHAPTER 3 BEFORE INSTALLING THE UNIT
System Dimensions and Clearances
Details physical dimensions and required clearances for unit installation.
Site Selection Guidelines
Criteria for choosing a suitable location for the system and batteries.
Unit Receiving and Moving
Instructions for safely handling and transporting the system.
Storage and Operating Environment
Specifies optimal temperature, humidity, and ventilation for system performance.
CHAPTER 5 AC INPUT & AC OUTPUT INSTALLATION
AC Installation Safety Precautions
Important cautions regarding hazardous voltages and proper installation practices.
AC Input Wiring
Step-by-step instructions for connecting the AC utility power to the system.
AC Output Wiring
Step-by-step instructions for connecting the system's output to loads.
CHAPTER 6 INSTALLING BATTERIES AND DC WIRING
Battery Installation Safety
Critical safety instructions for handling batteries due to high voltage and current.
Battery Installation Preparation
Covers necessary tools, voltage requirements, and pre-installation checks for batteries.
Battery Connection Procedures
Details on arranging batteries, making connections, and torque specifications.
Battery Replacement and Handling
Guidelines for replacing batteries, using correct types, and safe handling practices.
Proper Battery Disposal
Warnings and instructions for safely disposing of used batteries.
CHAPTER 7 TURNING ON THE SYSTEM AND SETTING PARAMETERS
System Startup Procedure
Step-by-step instructions to safely power on the system.
Front Panel Display and Keypad Functions
Explains the front panel display and the function of each keypad button.
System Monitoring and Logging
How to access meter readings, test logs, and event logs for system performance.
User Configuration and Information
Details on setting user parameters, viewing alarms, and system information.
System Status and Test Mode
Covers checking system status, load reduction, and initiating test modes.
Need help?
Do you have a question about the Illuminator IE Series and is the answer not in the manual?
Questions and answers