System Configurations; Warranty - Martin Audio W0.5 Manual

<
CONTENTS
8
The W0.5, WM0.5, W1, W2 and W3 may be used to cover the full-frequency
range – either distributed singly or arrayed in multiples. The WX3A and DX1
controllers provide appropriate system-specific low frequency equalisation for
full-frequency operation. Where additional low frequency output is required,
a WS2A sub-bass system driven from a separate amplifier fed from the sub-
bass output of the controller can be added.
Wavefront Professional Series loudspeakers combined with the appropriately
configured controller exhibit an essentially flat on-axis frequency response.
Equalisation to compensate for a particular acoustic environment may be
performed where required. Where loudspeakers are arrayed, they may
benefit from a degree of equalisation to reduce the effect of the low/mid build
up and tilting of the response inherent in the use of multiple arrayed
enclosures.
9
Martin Audio Wavefront Professional Series products are warranted against
manufacturing defects in materials or craftsmanship over a period of 5 years
from the date of original purchase. During the warranty period Martin Audio
will, at it's discretion, either repair or replace products which prove to be
defective provided that the product is returned in its original packaging,
shipping prepaid, to an authorised Martin Audio service agent or distributor.
Martin Audio Ltd. cannot be held responsible for defects caused by
unauthorised modifications, improper use, negligence, exposure to inclement
weather conditions, act of God or accident, or any use of this product that is
not in accordance with the instructions provided by Martin Audio.
Martin Audio is not liable for consequential damages.
This warranty is exclusive and no other warranty is expressed or implied.
This warranty does not affect your statutory rights.
All material © 2007. Martin Audio Ltd. Subject to change without notice.
Martin Audio – WAVEFRONT PROFESSIONAL SERIES
>
PRINT

SYSTEM CONFIGURATIONS

WARRANTY

7
GUIDES