Page 1
Sieu Phong co.,Ltd Wilo-Economy-MHI 2../ 4../ 8../ 16.. Einbau- und Betriebsanleitung Návod k montáži a obsluze Installation and operating instructions Instrukcja montażu i obsługi RUS Инструкция по монтажу и эксплуатации Notice de montage et de mise en service Inbouw- en bedieningsvoorschriften...
Page 5
Sieu Phong co.,Ltd ENGLISH 1. General Motor power: see rating plate, Maximum current: see rating plate, Installation and service by qualified personnel only Fluid temperature: –15 °C to 110 °C with gaskets – EPDM 1.1 Applications (KTW/WRAS), The pump is suitable for drinking water, heating water, industrial water, –15 °C to 80 °C version with condensate, water/glycol mixtures up to a ratio of 40% glycol as well with gaskets –...
Low-water protection should be provided by the customer by fitting the relevant parts from the WILO range of accesso- ries. The speed of the pump can be controlled when connected to a fre- Safety precautions which, if not followed, could damage the pump or quency converter or motor filter (see paragraph 5.3)
– The motor ventilator inlet must be kept clear, at least 0.30 m from In control devices with frequency converters supplied by WILO, the the wall to the rear. filter is already installed.
Page 8
If the fault cannot be remedied, please contact your local plumbing and heating specialist or WILO customer services. Figures: 1 Cross-section of the pump with reference numbers. 2. Positioning and pipework of the pump.
Need help?
Do you have a question about the Economy-MHI 202 and is the answer not in the manual?
Questions and answers