Related Manuals for Panasonic Attune WX-H3050
Summarization of Contents
FCC Compliance and Notices
FCC Interference Statement
Information regarding FCC compliance and interference statements for the device.
FCC Warnings and ID
Important warnings and FCC ID information for the equipment.
System Introduction
1. Introduction
Overview of the Panasonic WX-C3010 Center Module and its purpose.
System Features
2. Features
Key features of the WX-C3000 series digital wireless communication system.
Safety and Handling Precautions
3. Precautions
Important guidelines for safe operation, handling, and maintenance of the system.
System Parts and Accessories
4. WX-C3010 Series System Parts and Accessories
List of system components including Center Module, Order Taker, and Headsets.
Center Module Controls
4.1 Center Module WX-C3010
Details and diagrams of the WX-C3010 Center Module.
4.1.1 Center Module Major Operating Controls and Their Functions
Explanation of the main controls and indicators on the Center Module.
Center Module Indicators and Volume Controls
Control Indicators
Description of indicators like Power, Talk, Page, and Detector.
Volume Controls
Controls for setting speaker and microphone audio levels.
Center Module Operational Settings
Operational Settings Overview
Controls for speed team, vehicle detector, and greeter functions.
Greeter Function Controls
Buttons and indicators for greeter message management.
Greeter Function Management
Greeter Recording and Playback
Controls for recording and playing back greeter messages.
Greeter Output Destination
Settings for directing greeter output to speaker or headset.
System Settings and ID Registration
Installed System Setting Controls
Buttons for navigating and selecting system settings.
ID Registration Controls
Buttons and indicators for managing headset ID registration.
Order Taker Unit Controls
4.2 Order Taker Unit (WX-T3020)
Information about the WX-T3020 Order Taker unit.
Order Taker Unit Controls and Functions
Detailed guide to the controls and functions of the WX-T3020 Order Taker.
All-in-One Headset Controls
4.2.2 All in One Headset (WX-H3050)
Information about the WX-H3050 All-in-One Headset.
All-in-One Headset Controls and Functions
Detailed guide to the controls and functions of the WX-H3050 Headset.
Headset and Order Taker Unit Details
Unit Function Buttons
Description of buttons like Talk, Page, and Optional Function.
Unit Indicators and Controls
Explanation of indicators and volume/power controls.
Headset Unit Features
Headband and Pads
Adjustable components for headset comfort and fit.
Microphone Boom
Adjustable boom for microphone positioning.
Operating Procedures
4.2.3 Operating Procedures
Step-by-step instructions for operating the units.
ID Registration Process
4.2.4 ID Registration
Procedure for registering headsets with the center module.
ID Deletion Procedure
4.2.5 Deletion of ID
Instructions for deleting registered headset IDs.
Battery Management
4.3 Battery Loading & Replacement
Guidance on inserting and replacing batteries in the units.
Battery Charger Details
4.4 Battery Charger
Information about the battery charger and its capabilities.
Battery Charger Controls and Functions
Description of the battery charger's controls and indicators.
Battery Charger Installation
4.4.2 Battery Charger Preparation/Installation
Steps for preparing and installing the battery charger.
Battery Charging Procedure
4.4.3 How to Charge Batteries
Procedure for charging the system's batteries.
Center Module Installation Planning
5. CENTER MODULE INSTALLATION
Instructions for installing the center module.
Tools Required
List of tools needed for center module installation.
Site Survey
Checklist and considerations for site preparation before installation.
Installation Preparations
5.3 Installation Preparations
Key steps and checks before commencing installation.
Installation Notes
Vehicle Detector Mounting
Instructions for mounting the vehicle detector.
Speaker Post Installation Notes
Notes on speaker post installation and WX-C550 usage.
Mounting the Center Module
5.3.1 Mount Center Modules on Wall
Detailed steps for mounting the center module onto a wall.
Center Module Wiring
5.3.2 Wiring to the Center Modules
Instructions for connecting wires to the center module terminals.
Power Cord Securing
5.3.3 Clamping the Power Plug and Power Cord
Procedure for securing the power plug and cord.
System Setup
6. SETUP
Procedures for setting up and configuring the system.
6.1 Center Module Installed System Setting
How to configure the center module settings after installation.
System Setting Details
Auxiliary Speaker Setup
Configuring audio output for the auxiliary speaker.
Echo Cancel Level Adjustment
Adjusting the echo cancellation level for clearer audio.
Digital Noise Reduction Adjustment
6.1.3 Digital Noise Reduction (DNR) Adjustment
Adjusting the digital noise reduction level.
Tandem Operation Setup
6.1.4 Setup Tandem Operation for Dual Lane
Configuring tandem operation for double drive-thru lanes.
Lane, POS Remote, and TX Power Settings
Lane Select
Setting the center module for specific drive-thru lanes.
POS Remote Function
Configuring the POS Remote function and its impact.
TX Power Setting
Adjusting the transmit power for optimal range.
Operational Settings
6.2 Center Module Operational Setting
Configuring operational modes of the center module.
Speed Team Mode
Enabling and using the Speed Team operational mode.
Vehicle Detector Beep Settings
6.2.2 Vehicle Detector BEEP DAY/NIGHT
Setting vehicle detector beep behavior for day/night.
Speaker Level and Detector Mode Settings
Outside Speaker Level DAY/NIGHT
Adjusting outside speaker volume for day/night.
Vehicle Detector Normal/Override On
Configuring vehicle detector to normal or override mode.
Talk/Page Release Function
6.2.5 Talk/Page Release
Using the Talk/Page Release function.
Greeter Setting
6.3 Center Module Greeter Setting
Configuring greeter messages and output.
Headset and Order Taker Setup
6.4 Order Taker Unit and All-in-One Headset
Setup for Order Taker and All-in-One Headset units.
Opening Switch Compartment
Instructions for accessing the DIP switch compartment.
DIP Switch Setting
Configuration options via the DIP switches.
DIP Switch Configuration Details
Auto Talk Lock and Lane Select
DIP switch settings for Auto Talk Lock and lane selection.
Talk/Page Lock and Language
DIP switch settings for lock modes and voice prompt language.
RF Power Setting
DIP switch setting for RF power.
Auto-Talk-Lock Setup
6.4.3 Auto-Talk-Lock setup
Setting up the Auto-Talk-Lock feature for headsets.
Manager Mode Configuration
6.7 Manager Mode
Configuring a headset for manager mode.
Canceling Manager Mode
6.7.1 Canceling the Manager Mode
Procedure to disable manager mode on a headset.
Double Drive-Thru Installation
7. DOUBLE DRIVE-THRU INSTALLATION
Instructions for installing the system in a double drive-thru setup.
General Double Drive-Thru Overview
Overview of double drive-thru configurations.
Double Drive-Thru Operating Procedures
Operating the system in a double drive-thru environment.
Drive-Thru Lane Selection Procedures
Normal Setup Lane Selection
Operating procedures for normal drive-thru lane selection.
Direct Lane Select Setup
Operating procedures for direct lane select setup.
System Interface
8. SYSTEM INTERFACE
Details on connecting the system to external components.
Connect to Speaker Post
Connecting the center module to the speaker post.
Speaker Post Overview
8.2 Overview of Speaker Post
Diagrams and explanations for speaker post setup.
WX-C550 Speaker Installation
8.2.1 WX-C550 Installation
Specific installation guidelines for the WX-C550 unit.
Speaker Post Installation Examples
8.2.2 Install Speaker Post Example
Examples of proper and improper speaker post installations.
Center Module Connection Diagrams
9. CENTER MODULE CONNECTION
Wiring diagrams for connecting the center module.
Basic Wiring Connections
9.1 Basic Connection
Diagrams showing basic wiring connections.
Telephone Interface Connection
9.2 Telephone Interface
Connecting the system to a telephone interface.
External Device Control
9.3 External Device Control
Connecting and controlling external devices.
POS Interface Connection
9.4 POS Interface
Wiring and connection for the POS system interface.
Double Drive-Thru Interface
9.5 Double Drive-Thru Interface
Interface connections for double drive-thru setups.
Adapting to Vehicle Detection Systems
10. ADAPTING TO EXITING VEHICLE DETECTION SYSTEM
Information on adapting to existing vehicle detection systems.
Factory Switch Settings
11. Factory Switch Position of Center Module
Default factory switch settings for the center module.
System Specifications
Center Module Specifications
Technical specifications for the Center Module.
Unit Component Specifications
Order Taker Unit and Headset Specifications
Technical specs for Order Taker and All-in-One Headset units.
Battery Charger and Battery Specifications
Technical specs for the battery charger and batteries.
Need help?
Do you have a question about the Attune WX-H3050 and is the answer not in the manual?
Questions and answers