Related Manuals for Hammer K3 e-classic
Summarization of Contents
General
Explanation of symbols
Explains the meaning of various warning and information symbols used in the manual.
Safety
Intended use
Defines the specific and permitted applications for the HAMMER K3 panel saw.
Personal safety
Details essential personal protective equipment and safety measures for operators.
Specifications
Dimensions and weight
Provides detailed dimensions and weight specifications for the machine models.
Tools
Details specifications for saw blades, scoring blades, and slotting cutters.
Transport, packaging and storage
Safety instructions
Provides critical safety guidelines for transporting, loading, and unloading the machine.
Setup and installation
Safety instructions
Highlights safety precautions for machine assembly and installation.
Assembly
Describes the assembly process for key machine components like the sliding table.
Making adjustments and preparations
Safety instructions
Emphasizes safety when making adjustments or preparing the machine.
Parallel cutting fence
Covers the sliding and adjustment of the parallel cutting fence.
Setting the height/angle of cut
Details how to adjust the cutting height and angle of the saw blade.
Operation
Safety instructions
Provides essential safety instructions for operating the machine.
Switching on the machine / Switching off the machine / Emergency-stop
Covers procedures for safely switching the machine on, off, and using the emergency stop.
Permitted working techniques
Lists the allowed working techniques for the circular saw and its scoring unit.
Longitudinal cut
Details the procedure for performing longitudinal cuts on the machine.
Trimming
Explains how to perform trimming operations safely using a trimming shoe.
Cross-cutting at the crosscut fence (Sliding table)
Explains how to perform cross-cuts using the sliding table and crosscut fence.
Groove cuts
Details safety and procedures for making groove cuts.
Maintenance
Safety instructions
Emphasizes safety precautions for all maintenance work on the machine.
Maintenance schedule
Provides a schedule for routine maintenance tasks based on intervals.
Tightening/replacing the drive belt
Covers tensioning and replacing the drive belt for the machine.
Dismantling the sliding table
Provides step-by-step instructions for dismantling the sliding table.
Faults
Safety instructions
Emphasizes safety precautions for repairing faults.
What to do if a fault develops
Provides initial steps to take when a fault is detected.
Faults, causes and repairs
Lists common faults, their causes, and recommended repair procedures.
Adjusting/correcting the parallel cutting fence angle
Details how to adjust or correct the angle of the parallel cutting fence.
Need help?
Do you have a question about the K3 e-classic and is the answer not in the manual?
Questions and answers