Martin Audio C115 Manual page 2

Table of Contents

CONTENTS

Standards Applied

Thank you for purchasing a Martin Audio C115 loudspeaker. This is a

versatile surface-mount loudspeaker designed for high quality music and

speech reproduction in distributed sound systems. It has been carefully

styled to present a discrete, high quality appearance, which will blend

unobtrusively into commercial and architectural environments.

The C115 is available in the following electrical configurations:

• 8 ohm

• 100V line (Europe and Japan)

• 70V line (USA)

Typical applications include retail outlets, bars, hotels and restaurants.

Each C115 is supplied with a unique wall bracket which permits off-axis

adjustment of 40 degrees horizontally and 35 degrees vertically. Additional

hardware is available for corner mounting and for arrays of 2, 3 or 4

speakers to give the C115 exceptional mounting flexibility.

The C115 is packed in pairs complete with wall brackets. Each Martin

C115 is built to the highest standard and thoroughly tested before it leaves

the factory. After unpacking the speakers and brackets, examine them

carefully for any signs of transit damage and inform your dealer if any such

damage is found.

Check that the electrical configuration supplied (8 ohm, 100V line or 70V

line) is the one you require. It is suggested that you retain the original

packaging so that the speakers can be repacked and returned if necessary.

Please note that Martin Audio and its distributors cannot accept

responsibility for damage to any returned product through the use of non-

approved packaging.

This equipment conforms to the requirements of the

EMC Directive 89/336/EEC, amended by 92/31/EEC

and 93/68/EEC and the requirements of the Low

Voltage Directive 73/23/EEC, amended by 93/68/EEC.

EMC

Emission

Immunity

Electrical Safety

INTRODUCTION

UNPACKING

Martin Audio – C115 Loudspeaker

EN55103-1:1996

EN55103-2:1996

EN60065:1993

GUIDES

Table of Contents