Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Reer MBEI
Summarization of Contents
Signals and Pinout Overview
Module MBC Signals and Pinout
Details signals and pinout for the MBC module, including LED status indicators.
Module MBD Signals and Pinout
Details signals and pinout for the MBD module, including LED status indicators.
Diagnostics Explained
I/O Index Field for Diagnostics
Details the I/O index field for diagnostics, its range dependent on system version.
Diagnostic Code Field Details
Explains the diagnostic code field and lists input diagnostic codes and their meanings.
Output Diagnostics Overview
Lists output diagnostic codes and their corresponding meanings.
Diagnostics Examples
Example 1: Connection Error
Illustrates a connection error on Input 1 of module M1 with a specific I/O index.
Example 2: Indexing Logic
Explains I/O index correspondence to logical blocks and physical terminals.
Example 3: Module MI16 Errors
Shows OUT_TEST error and connection error diagnostics for input 1 of module MI16.
Example 4: OSSD Restart Wait
Demonstrates diagnostics for OSSD 1A/1B, indicating wait for restart.
Bus Configurator User Interface
Connection Examples
Illustrates connection diagrams for MBx and MBU modules with PC and PLC.
Graphical User Interface Configuration
Details the steps to configure modules using the Bus Configurator software.
Backward Compatibility Mode (M1 FW < 5.0.0)
Process Image in Backward Compatibility
Describes the 'old' process image mapping and its adaptation to installed hardware.
GUI for Backward Compatibility
Details enabling backward compatibility and selecting exported subsections in the software.
Process Image Config in Backward Compatibility
Explains how to configure input/output process images using the Bus Configurator software.
Need help?
Do you have a question about the MBEI and is the answer not in the manual?
Questions and answers