Remington 496 Operating Instructions Manual page 9

2. Should the tool fail to fire, hold the muzzle firmly against the work surface for
30 seconds. Release the trigger and remove pressure on the tool while
holding the muzzle against the work surface. Again press the tool firmly
against the work surface and pull the trigger. If the tool still fails to fire, hold
the tool firmly against the work surface for another 30 seconds before
advancing the power load strip. Use remaining loads in strip. Discard power
load strip into water or oil.
G 018
3. Always use the spall shield when driving directly into concrete or steel. Always
wear goggles.
G 018
482-49
4. Never use a powder actuated tool in an explosive or flammable atmosphere or
when non-sparking tools are required.
POWER LOADS AND FASTENERS
G 018
1. Never leave unfired power load strips on floors or work surfaces.
105635
Safety Precautions
;
; ;
GAS
OLINE
482-50
G 018
G 018
9
WATER
GASOLINE