Remington 496 Operating Instructions Manual page 20

D. REMOVING FIRING PIN
1. Remove two springs from outer liner assembly (see Figure 8).
2. Push in sear and pull out firing pin guide (see Figure 8). Line up sear with end of
slot. Remove spring and sear. Remove firing pin assembly. Remove push pin
(see Figure 9).
Sear
Firing Pin
Guide
Figure 8 - Removing Springs and
Pushing in Sear to Remove Firing
Pin Guide
E. REMOVING TRIGGER ASSEMBLY
1. Remove trigger pin from housing with hammer and punch (see Figure 10).
2. Remove trigger assembly from rear of housing.
Housing
Figure 10 - Removing Trigger Pin and Trigger Assembly
F. REMOVING OUTER LINER ASSEMBLY FROM HOUSING
1. Grasp outer liner assembly and remove from housing.
2. Remove spring and ball bearing located at rear of liner.
Outer Liner Assembly
Figure 11 - Removing Outer Liner Assembly from Housing
Springs
Outer
Liner
Assembly
Firing Pin Assembly, and Push Pin
Trigger Pin
Ball
Bearing
20
Push Pin
Firing Pin Assembly
Figure 9 - Removing Sear, Spring,
Spring
Sear
Spring
Trigger Assembly
Tool Body
105635