Operation; Front Panel Operation - Arcam FMJ T32 - AUTRE Handbook

operation

DISP MENU
INFO OK

Front panel operation

These functions can also be controlled by the CR90
remote control. (See pages 14 for details.)
STandbY
Press to switch the tuner between On (green
sTandby
light) and Standby (red light). (Equivalent to P on
remote control.)
diSP
Press to cycle through the brightness settings of the
disp
front-panel display. (Equivalent to D on remote control.)
Menu
Press to access the setup menu. Use the
Menu
Navigation buttons to move between menu items and
the Control knob to change settings within an item.
(Equivalent to U on remote control.)
navigation buttons
Use 6 or 5 to change signal sources between AM,
FM, DAB*, Sirius* and iPod/Aux (Equivalent to M on
remote control). The Navigation buttons are also used to
move between items in the setup menu.
inFo
Press to change the type of information shown on
info
the second line of the front panel display, depending on
the source signal. (Equivalent to i on remote control.)
* Where fitted/available
1Ð8 2Ð9 3Ð10 4Ð11 5Ð12
ok
Press to confirm a digital radio channel selection or a
oK
preset selection. (Equivalent to O on remote control.)
control knob
Used to manually tune stations by selecting a frequency, or
to cycle through stations (DAB, Sirius) or stored presets.
Also used to select settings within a setup menu item.
Preset buttons (1–8, 2–9, etc.)
Press a Preset button briefly to select the first preset
number listed (Preset 1, for example). Press and hold
the button for one second to select the second number
listed (Preset 8, for example). In this way, up to 14 preset
stations can be accessed from the front panel.
To access stations beyond 14 (up to a maximum of 100),
use the remote control, or the Control knob with
PReSeT
Press to recall a station or channel stored as a
pReseT
preset. You can quickly cycle through all the presets
using the Control knob, selecting a preset value with the
button (see page 13).
oK
Alternatively, use the numeric keypad on the remote
control to select a preset directly.
SToRe
This button allows you to assign a currently tuned radio
station to the next free preset number – or to a chosen
preset number. See 'Storing a preset' on page 13.
e-10
T32 TUNER
6Ð13 7Ð14 PRESET STORE STANDBY
.
oK