Arcam Alpha 10 Handbook
Arcam digital radio tuner handbook
Hide thumbs
Also See for Alpha 10:
- Handbook (15 pages) ,
- Service manual (19 pages) ,
- Handbook (15 pages)
Need help?
Do you have a question about the Alpha 10 and is the answer not in the manual?
Questions and answers
Здравствуйте! Усилитель ARCAM ALPHA 10 дисплей включается на несколько секунд и гаснет. Пульт дистанционного управления утерян. Как запустить дисплей? Похоже, что он в режиме OFF....
The issue may be related to the front panel circuit board or the microprocessor controlling the power functions. If the display turns off after a few seconds and the remote control is unavailable, try the following steps:
1. Check Power Connection: Ensure the power cord is securely connected. Try unplugging and replugging it multiple times, as this has been reported to sometimes turn the unit on.
2. Inspect the On/Off Button: The power button may not be functioning correctly. If the unit occasionally stays on when plugged in but does not respond to the button, the issue could be with the button or the microprocessor.
3. Leave It Plugged In: If the unit stays on when it remains powered for a longer period, try keeping it plugged in and avoid turning it off.
4. Check Fault-Finding Guide: Refer to the manual's power circuit description and fault-finding diagram to diagnose potential issues.
5. Consider Repair: If the front panel processor is faulty, it may need replacement. Some users with spare circuit boards may be able to assist.
If none of these steps work, professional servicing may be required.
This answer is automatically generated
@Mr. Anderson Hello! I have already tried items 1,2 and 3. Once the display turned on and worked normally for about an hour. Today I'll try to check items 4 and 5. Thank you very much indeed, I'm very grateful for your advice. Best regards, Sergei.
как без пульта отключить блокировку индикатора в интегральном усилителе /Arcam-Alpha-10.