Related Manuals for Sartorius Mark 3 LTE
Summarization of Contents
Introduction to Sartorius LMA110S
Descriptions and Symbols
Defines safety symbols, key labels, and danger/caution/note indicators used in the manual.
Getting Started with Your Moisture Analyzer
Storage and Shipping Conditions
Acceptable temperature ranges for storing and shipping the analyzer to maintain its condition.
Unpacking the Moisture Analyzer
Step-by-step instructions for carefully unpacking the analyzer and checking for all components.
Equipment Supplied
Lists all components and accessories included with the moisture analyzer upon delivery.
Instructions for Recycling the Packaging
Advises on the proper disposal and recycling of the analyzer's packaging materials.
Choosing a Suitable Location
Specifies environmental and positional requirements for installing the analyzer to ensure optimal performance.
Connecting the Moisture Analyzer to AC Power
Details the correct procedure for connecting to power, including voltage checks and grounding.
Leveling the Moisture Analyzer
Ensures the heater module is horizontal using the built-in level vial for accurate measurements.
Warm-up Procedure
Describes the necessary warm-up period for the analyzer to reach optimal operating temperature.
Operating Design and Keypad Functions
Keypad Overview
Details functions of numeric, navigational, and dedicated keys for user interaction.
Soft Key Functionality
Explains dynamic soft key functions, which change based on on-screen display labels.
Display Modes
Warm-up Display
Initial power-on state where the analyzer conditions itself, often showing a blank screen.
Standby (or Test Done) Display
Operational state between tests, displaying program name, time, temperature, and last result.
Test Display
Screen displayed when a test is initiated, guiding sample addition and result display.
Graph Display
Visualization of test data, showing weight/time and temperature/time plots.
Data Log Display
Review, sort, and analysis of past test results stored in analyzer memory.
Data Output and Status Indicators
LED Status Lights
Describes the function of tri-color LEDs on the heater module indicating balance and heating status.
Operating the Moisture Analyzer
Standby Screen
Primary interface screen for accessing all analyzer operations and parameter settings.
Standby-Temperature with a New Program
New programs inherit standby temperature; adjust for sensitive samples.
Setup Menu
Setting Device Parameters in Program Manage Menu
Access and modify parameters for creating, editing, and managing drying programs.
Slope Function for Endpoint Determination
Window of Time for Slope
Time duration used to monitor weight change for slope-based endpoint calculation.
Endpoint Calculation Methods
Advanced slope settings (Calc 1-3) for faster endpoint determination.
Ideal Weight Settings
Ideal Weight Percent Limit
Tolerance range for ideal weight in percentage, defining acceptable sample weight variations.
Ideal Weight Lock
Locking ideal weight, preventing use of weights outside target limits.
Program Management
Create a New Program
Creating and storing up to 60 new drying programs with custom parameters.
Delete Program
Removing unwanted drying programs from analyzer memory.
Sort Programs
Organizing stored programs alphabetically or by filling blank slots for easier recall.
Configuring the Printout
Print Current Program
Printing parameters of the currently active drying program.
Print Program List
Printing a list of all stored drying programs on the analyzer.
Print All Programs
Printing all stored programs with their detailed parameters.
Results Printout Format
Header Lines Customization
Editing custom header lines that appear on printed test reports.
Communication Ports
Serial Command Set
Using specific commands via PC to control analyzer setup and operations.
Pin Assignment Chart
Pin configuration for the 9-pin DE-9S serial connector.
Security Features
Activate and Deactivate Security
Enabling or disabling security features using a pass code.
Setup Security Access
Granular control over which specific features are protected by the security pass code.
Manage Program Storage
Clear All Programs
Erasing all user-created and stored drying programs from the analyzer.
Save User Programs to Archive
Creating a backup of current programs by saving them to an archive.
Audio, Video and Language Settings
Audio Adjustments
Enabling or disabling audio beeps for key presses, ideal weight, and end-of-test notifications.
Video Contrast Adjustment
Adjusting screen contrast for optimal visibility.
Video Color Scheme
Switching between black-on-white and white-on-black screen display modes.
Setting the Language
Selecting the desired language for the analyzer's interface.
Service Menu
System Information
Displays analyzer information: model, serial number, software versions, and calibration dates.
Calibration and Adjustment Functions
Calibrate Balance
Calibrating the analyzer's balance using external weights and setting calibration intervals.
Heater Adjustment Procedures
Adjust or Verify Temperature
Performing manual temperature calibration, verification, and automatic calibration.
Need help?
Do you have a question about the Mark 3 LTE and is the answer not in the manual?
Questions and answers