Related Manuals for Bosch Tronic 6000 T Series
Summarization of Contents
Explanation of symbols and safety instructions
Explanation of symbols
Details the warning symbols and signal words used in the document for risk communication.
Safety instructions
Covers safety guidelines for installation, maintenance, and handover to the user.
Technical properties and dimensions
Determined use
Specifies the intended purpose of DHW cylinders and warns against inappropriate use.
Type overview
Presents a table detailing different DHW cylinder models and their technical designations.
Description of the DHW cylinder
Outlines the key components and construction features of the DHW cylinder.
Corrosion protection
Explains the enamel coating and magnesium anode used for protecting the cylinder from corrosion.
Accessories
Lists and illustrates the accessories supplied with the DHW cylinder.
Technical data
Provides detailed technical specifications for Tronic 4000 T and Tronic 6000 T models.
Dimensions
Illustrates and tabulates the physical dimensions of the DHW cylinders in mm.
Regulations
Regulations
Highlights the need to observe local standards for installation and handling of DHW cylinders.
Transport
Transportation, storage and recycling
Guidance on proper storage conditions and recycling directives for the appliance.
Installation
Important information
Key safety precautions and requirements before commencing installation.
Selecting the installation location
Criteria for choosing a suitable location, including load capacity and protection zones.
Wall mounting bracket
Instructions and warnings related to the proper use of wall mounting brackets.
Water connection
Detailed steps and notices for connecting the DHW cylinder to the water supply.
Electrical connection
Safety precautions and requirements for connecting the DHW cylinder to the electrical supply.
Commissioning
Steps to follow for the final checks and handover after installation.
Operating the appliance
Turn the appliance on/off
Instructions on how to switch the DHW cylinder on and off safely.
Adjust the domestic hot water temperature
Guide on how to set and control the water temperature using the temperature controller.
Draining the DHW cylinder
Procedure for safely draining the hot water cylinder, including scalding warnings.
Environmental protection/Recycling
Packaging
Details on the environmental compatibility and recyclability of packaging materials.
Old electrical and electronic appliances
Guidance on the proper disposal and recycling of old electrical and electronic equipment.
Maintenance/inspection
Cleaning
Instructions for cleaning the DHW cylinder casing without abrasive or caustic agents.
Pressure relief valve checks and maintenance
Guidance on checking for leaks and manually operating the pressure relief valve monthly.
Maintenance and repair responsibility
Clarifies customer responsibility for regular maintenance and repairs by authorized personnel.
Regular maintenance
Covers checks for function, magnesium anode, thermal disinfection, and extended nonuse.
Safety Thermostat
Details the automatic safety device and how to reset the high limit safety cut-out.
After maintenance
Post-maintenance checks including retightening connections and reconnecting power.
Faults
Fault/cause/remedy
Troubleshooting guide for common problems, their causes, and recommended remedies.
Need help?
Do you have a question about the Tronic 6000 T Series and is the answer not in the manual?
Questions and answers