2 | Contents Important information Contents This symbol indicates important information where there is no risk to people or property. Key to symbols and safety instructions ....2 Key to symbols .
▶ Do not use or store corrosive substances (solvents, adhesives, chlorinated cleaning agents, etc.) within the vicinity of the appliance. Product details WBN 6000-30-H-E-N/L-S2400 are appliances for central heating. Standard delivery 8 716 473 217-02.1O Fig. 3 Check the central heating system pressure The standard operating pressure is 1 - 2 bar.
4 | Operation Top up the heating system Operation The filling unit is located at the bottom of the appliance between the connection for the heating flow and the cold water connection. Overview of controls NOTICE: Damage to appliance due to cold water! Stress cracks can occur on the hot heat exchanger when the heating water is topped up.
Operation | 5 Switching the appliance on/off Setting the heating control unit Switching on Observe the operating instructions of the heating ▶ Start the appliance at the standby key. controller. This shows you: The display shows the heating water flow temperature. ▶...
This may mean that the appliance is in operation for a longer period of time but actually consumes less gas than an appliance that is Gaz 6000 W (e.g.. WBN 6000-30-H-E-N/L-S2400). constantly being switched on and off....................
Environment / disposal Environmental protection is a fundamental corporate strategy of the Inspection and service Bosch Group. The user is responsible for the safety and environmental compliance of The quality of our products, their efficiency and environmental safety the heating system.