Eton Res 10 P Instruction Manual

Eton Res 10 P Instruction Manual

10" spare wheel active & passive subwoofer

Advertisement

10" ERSATZRADMULDEN
AKTIV & PASSIV SUBWOOFER
ACTIVE & PASSIVE SUBWOOFER
RES 10 A
RES 10 A
RES 10 P
RES 10 P
EINBAU-ANLEITUNG
INSTRUCTION MANUAL
10" SPARE WHEEL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Res 10 P and is the answer not in the manual?

Questions and answers

Summarization of Contents

Safety Instructions
Hearing Damage Warning
Continuous exposure to sound pressure levels over 85dB may cause permanent hearing loss.
Volume and Driver Awareness
Use of sound components can impair hearing of traffic sounds and create driving hazards.
Precautions – Read First
Battery Disconnection
Disconnect the battery negative terminal before installation to prevent damage, fire, or injury.
Qualified Personnel Installation
Installation and adjustment should only be entrusted to qualified personnel.
External Device Connection
Refer to the operating instructions for external devices before connecting.
Repair and Warranty Warning
Do not open or attempt to repair the subwoofer; contact dealer for assistance. Unauthorized changes void warranty.
Spare Wheel Mounting Design
Subwoofers are designed exclusively for mounting in the spare wheel.
Installation Location Warning
Install only in the vehicle interior or spare wheel, never in the motor compartment.
Handling Precautions
Do not subject the subwoofer to high pressure or allow foreign objects/fluids to enter.
Before Installation Guidelines
Power Wire Routing Caution
Avoid running power wires near low-level input cables to prevent audio system noise.
Drilling Safety Check
Be careful not to cut or drill into vehicle tanks, lines, or wiring.
Wire Routing Protection
Run wires inside the vehicle for best protection.
Product Features
Enclosure Construction
Rigid sealed wood enclosure.
Physical Dimensions
Flat dimensions 57,5 cm x 15 cm (DxH).
Subwoofer Specifications
10" (25 cm) subwoofer, 300 W RMS, 2 x 2 Ohm Impedance.
Passive Version Terminals
Connection terminals for the passive version.
Active Module Details
Integrated 300 W RMS active module with inputs and controls.
Remote Level Control
Cable remote control with level setting.
Auto-Sense Functionality
Auto-sense on function for automatic power activation.
Hidden Mounting Method
Completely hidden installation in the spare wheel mould.
Mounting Accessories Included
Inclusive mounting accessories for original fix-point.
Installation and Wiring Diagrams
High-Level Input Wiring
Diagram and instructions for connecting via High-Level Inputs.
Low-Level / RCA Input Wiring
Diagram and instructions for connecting via RCA (Low-Level) inputs.
Wiring and Connections
Passive Version Connection
Instructions for connecting the subwoofer to an appropriate amplifier.
Cable Remote Control Usage
Instructions on how to adjust subwoofer level using the cable remote control.

Table of Contents