HP StoreEasy 1860 Quick Start Manual

HP StoreEasy 1860 Quick Start Manual

1x60 storage system

Advertisement

HPE StoreEasy 1X60 Storage Quick Start
Guide
Abstract
This document provides system administrators step-by-step instructions for setting up an HPE
StoreEasy 1X60 Storage system for the first time. After deployment of the system, HPE
recommends you to read the StoreEasy 1X60 Administration Guide to learn how to configure and
maintain all models of HPE StoreEasy 1X60 Storage.
*P05633-001*
Part Number: P05633-001
Published: March 2018
Edition: 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the StoreEasy 1860 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Document Introduction
Abstract
Provides an overview of the HPE StoreEasy 1X60 Storage Quick Start Guide's content and purpose.
System Preparation and Installation
Product Models
Identifies the HPE StoreEasy 1000 Storage models covered by this guide.
Unpack HPE StoreEasy 1X60 Storage System
Instructions for checking hardware components and documentation included in the shipping box.
Install Rail Kits and Mount System in Rack
Covers safety precautions and steps for installing rail kits and mounting the storage system in a rack.
System Configuration and Operation
Cabling StoreEasy System to Network
Connects iLO and storage network ports for system management and data transfer.
Power Up Storage System
Initiates power for the HPE StoreEasy 1X60 using the front panel power button.
Initial Startup Sequence
Guides through boot sequence: language, license, and administrator password setup.
Post-Setup and Support Information
Next Steps
Lists recommended tasks after initial setup: system settings, network config, software updates.
Warranty and Regulatory Information
Provides product warranty details, safety, compliance, and local representative contacts.

Table of Contents