Table of Contents
Related Manuals for Doosan GC50C-5
Summarization of Contents
Disassembly & Assembly
Hood (with seat)
Procedure for removing and installing the hood and seat assembly.
Overhead Guard
Procedure for removing and installing the overhead guard.
Tilt Cylinders
Procedure for removing and installing tilt cylinders.
Secondary Lift Cylinders
Procedure for removing and installing secondary lift cylinders.
Primary Lift Cylinder
Procedure for removing and installing the primary lift cylinder.
Hydraulic Control Value
Procedures for disassembling and assembling hydraulic control valves.
Steering Wheel
Procedure for removing and installing the steering wheel.
Steering Unit
Procedure for removing and installing the steering unit.
Brake Hydraulic Booster
Procedure for removing and installing the brake hydraulic booster.
Tie Rods
Procedure for removing and installing tie rods.
Steering Knuckles, Kingpins, And Bearings
Procedure for removing and installing steering knuckles, kingpins, and bearings.
Steer Axle
Procedure for removing and installing the steer axle.
Steering Cylinder
Procedure for removing and installing the steering cylinder.
Tires And Rims (Steer)
Procedure for removing and installing steer tires and rims.
Hydraulic Pump
Procedure for removing and installing the hydraulic pump.
Hydraulic Oil Filter Assembly
Procedure for removing and installing the hydraulic oil filter assembly.
Drive Axle and T/M
Procedure for removing and installing the drive axle and transmission.
Engine
Procedure for removing and installing the engine.
Disassembly Process
Center section
Steps for disassembling the hydraulic pump's center section.
Front section
Steps for disassembling the hydraulic pump's front section.
Reassembly Process
Center section
Steps for reassembling the hydraulic pump's center section.
Front cover area
Steps for reassembling the front cover area of the hydraulic pump.
Need help?
Do you have a question about the GC50C-5 and is the answer not in the manual?
Questions and answers