Table of Contents
Advertisement
Quick Links
Originalbetriebsanleitung für SELVE-Antriebe
SEL Plus-RC/SES-RC . . . . . . . . . . . . . . . . . . Seite 2
Bitte bewahren Sie die Anleitung auf!
Operating instruction for SELVE motors
SEL Plus-RC/SES-RC . . . . . . . . . . . . . . . . . Page 36
Keep these instructions in a safe place!
Notice de réglage des moteurs SELVE
SEL Plus-RC/SES-RC . . . . . . . . . . . . . . . . . Page 70
Prière de conserver cette notice !
Afstelhandleiding SELVE buismotoren
SEL Plus-RC/SES-RC . . . . . . . . . . . . . . . . . Blz. 104
Deze handleiding zorgvuldig bewaren!
SEL Plus-RC/SES-RC . . . . . . . . . . . . . . . Strona 138
commeo/iveo
Advertisement
Table of Contents
Related Manuals for Selve SEL Plus-RC Series
Summarization of Contents
Motor Features and Properties
Intended Use
Defines the intended application of the SEL Plus-RC and SES-RC motors.
Basic Motor Properties
Details fundamental characteristics like obstacle detection and overload.
SELV E commeo/iveo Radio System
Explains the radio frequency and compatibility of SELVE motors.
Installation and Electrical Connection
Motor Installation into Shaft
Steps for fitting the motor into the drive shaft.
Motor Mounting and Support
Methods and options for mounting the motor.
Pluggable Cable Assembly/Disassembly
Instructions for connecting and disconnecting the pluggable cable.
Electric Wiring
Wiring diagrams for radio motor connection without and with switch.
Setting the End Positions
Delivery Status and Initial Setup
Describes the initial state of the motor without programmed end positions.
Setup Function Options
Lists methods for setting end positions via switches or transmitters.
Mechanical Requirements
Details mechanical needs, especially for SES-RC motors.
End Position Setting with Setting Switch
Explains setting end positions using a wired setting switch.
Automatic Setup Mode
Guide to setting end positions automatically.
Manual Setup Mode (Lower/Upper Points)
Steps for manual end position setting, including lower and upper points.
Manual Setup Mode (Top Stop/Release)
Manual setting for top stop/release and automatic stopping.
comm eo Initial Operation and Radio Setting
Receiver Selection
Procedure for selecting and pairing receivers with transmitters.
Functions with Selected Motor
Overview of functions available for a selected motor in SELECT mode.
Automatic Setup Mode
How to set end positions automatically.
Manual Setup Mode
How to set end positions manually.
Manual Setup Mode (Top Stop/Release)
Manual setting for top stop/release.
Transmitter Programming/Deletion
Steps to program or remove transmitters.
Delete Receiver Transmitter Table
How to clear all stored transmitters from the receiver.
Reset Receiver to Factory Settings
Restoring the receiver to its original factory configuration.
Configuration Mode (Qualified Personnel)
Accessing advanced configuration settings.
iveo Initial Operation and Radio Setting
Intermediate Positions
Setting intermediate positions.
Limit Position Setting/First Transmitter Programming
Guide to setting end positions and programming the initial transmitter.
Automatic Setup Mode for End Positions
Instructions for automatic end position setting.
Manual Setup Mode for End Positions (Lower)
Manual setting for lower end position.
Manual Setup Mode for End Positions (Upper)
Manual setting for upper end position and auto-stop.
Learn Transmitters/Channels
How to learn in transmitters/channels.
Program Further Transmitters/Channels
Steps to program additional transmitters or channels.
Delete Transmitters/Channels
How to delete programmed transmitters or channels.
Service Mode Functions
Using service mode with a transmitter for settings.
Adjust End Limits via Transmitter
Adjusting end positions with an assigned transmitter.
Reprogram Transmitter (Lost/Damaged)
Reprogramming a new transmitter if the old one is lost or faulty.
Reset to Delivery Status
Returning the motor to its factory delivery state.
Group Separation
Procedure for separating motors from a group control.
Change Radio System to commeo
Switching the radio system from iveo to commeo.
Troubleshooting and Conformity
Troubleshooting Common Issues
Lists common problems and their solutions.
General Declaration of Conformity
Statement of compliance with relevant EU directives.
Need help?
Do you have a question about the SEL Plus-RC Series and is the answer not in the manual?
Questions and answers