Harbor Freight Tools 97966 Instructions

5 piece cab mounted light

Advertisement

Quick Links

5 piece cab mounted Light
distributed exclusively by harbor Freight tools
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
read aLL precautions and instructions.
©
Copyright
2008 by Harbor Freight Tools
or any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools. Diagrams within this document may not
be drawn proportionally. Due to continuing improvements, actual product may differ slightly
from the product described herein.
For technical questions or replacement parts, please call

unpacking

If any parts are missing or broken,
please call Harbor Freight Tools at the num-
ber shown on the cover of this document as
soon as possible.
important saFetY
inFormation

assembly precautions

1.
Install only according to these instruc-
tions. Improper installation can create
hazards.
2.
Wear ANSI-approved safety goggles
and heavy-duty work gloves during
assembly.
3.
Keep installation area clean and well lit.
4.
Keep bystanders out of the area during
5.
Do not install when tired or when under
the influence of drugs or medication.
SKU 9766-67
instructions and precautions
1-800-444-3353.
For technical questions, please call 1-800-444-3353.
model
®
. All rights reserved. No portion of this document

use precautions

1.
This product is not a toy. Do not allow
children to play with this item.
2.
Use for intended purpose(s) only.
3.
Inspect before use; do not use if parts
loose or damaged.
4.
Application of this product must meet
State and DOT requirements for vehicle
lighting.
5.
Turn vehicle off and disconnect the bat-
tery before installation.
6.
WARNING: The brass components
of this product contain lead, a chemi-
cal known to the State of California to
cause birth defects (or other reproduc-
tive harm). (California Health & Safety
code § 25249.5, et seq.)
7.
Maintain product labels and name-
plates. These carry important safety
information. If unreadable or miss-
ing, contact Harbor Freight Tools for a
replacement.
97966
97967
®
.
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 97966 and is the answer not in the manual?

Questions and answers

Summary of Contents for Harbor Freight Tools 97966

  • Page 1 97966 97967 5 piece cab mounted Light instructions and precautions ® distributed exclusively by harbor Freight tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com read aLL precautions and instructions. © ® Copyright 2008 by Harbor Freight Tools .
  • Page 2 If the Lights are to work independently assembLY instructions of the vehicle’s lights, mount the Switch at a convenient location with the two read the entire important Short Screws (3). saFetY inFormation section at the beginning of Connect the Lead Wire to the middle this document including all terminal of the Switch (7).
  • Page 3 THIS WARRANTy IS ExPRESSLy IN LIEU OF ALL OTHER WARRANTIES, ExPRESS OR IMPLIED, INCLUDING THE WARRANTIES 97966 OF MERCHANTABILITy AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid.
  • Page 4 Wiring diagram Lights SKU 9766-67 For technical questions, please call 1-800-444-3353. Page 4...

This manual is also suitable for:

Road shock 97966Road shock 97967

Table of Contents