Table of Contents
Advertisement
Quick Links
22-Ton Air/Hydraulic Bottle Jack
Specifications
Item 66242
Weight Capacity
22 Ton (44,000 lb.)
Maximum Height 17-11/16 IN. (without saddle)
Minimum Height
9-3/16 IN. (without saddle)
Max. Air Pressure 145 PSI
Air Inlet
1/4 IN. - 18 NPT
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
When unpacking, make sure that the product is
intact and undamaged. If any parts are missing
or broken, please call Harbor Freight Tools
at 1-800-444-3353 as soon as possible.
©
Copyright
2008 by Harbor Freight Tools
or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
®
. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape
Manual Revised 11i
Advertisement
Table of Contents
Related Manuals for Harbor Freight Tools 66242
Summary of Contents for Harbor Freight Tools 66242
- Page 1 2008 by Harbor Freight Tools or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
-
Page 2: Important Safety Instructions
Wear heavy-duty work gloves during use. Always wear eye protection. Wear ANSI-approved safety goggles. g. Always wear hearing protection when using the tool. Prolonged exposure to high intensity noise is able to cause hearing loss. SKU 66242... -
Page 3: Air Source
Never use oxygen, carbon dioxide, combustible gases or any bottled gas as an air source for the tool. Such gases are capable of explosion and serious injury to persons. SKU 66242 For technical questions, please call 1-800-444-3353. SAVE THESE INSTRUCTIONS. - Page 4 15. Maintain labels and nameplates on Bottle Jack. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 16. Bleed the hydraulic system before its initial use. 17. Do not leave tool unattended when it is connected to a compressed air supply.
-
Page 5: Air Supply
Pneumatic Tool Oil to the airline connection before operation. Add a few more drops after each hour of continual use. SKU 66242 For technical questions, please call 1-800-444-3353. 2. Attach an air hose to the compressor’s air outlet. - Page 6 Page 6 For technical questions, please call 1-800-444-3353. SKU 66242...
- Page 7 SKU 66242 For technical questions, please call 1-800-444-3353. Page 7...
- Page 8 Place the Lock Lever in its locked position. Then remove the jack stand(s) from under the vehicle. 2. Slowly turn Knob (6.11) assembly counterclockwise (never more than one full turn) to lower the vehicle. SKU 66242...
-
Page 9: Bleeding Instructions
SKU 66242 For technical questions, please call 1-800-444-3353. 2. Remove the Filler Plug (1.19), and fill the Cylinder Base (1.14) reservoir with hydraulic oil (not included). 3. Rapidly pump Handle several times to purge air. -
Page 10: Please Read The Following Carefully
Adjustable Rod Split Pin Lock Lever Spring Pin Hex Screw Handle Control Rod 6.10 Spring Pin 6.11 Knob 6.15 Handle Cap 12.1 Adapter-A 12.3 Adapter-C 12.4 Adapter-D 12.5 Adapter Holder 12.6 U-Bolt 12.7 Spring Washer 12.8 12.9 Hitch Pin SKU 66242... - Page 11 3.17 1.10 3.15 1.11 3.14 3.13 1.12 3.11 1.13 3.10 1.18 1.19 1.16 1.14 1.17 1.21 1.20 SKU 66242 For technical questions, please call 1-800-444-3353. 12.9 12.3 12.1 12.4 12.8 12.7 12.5 3.26 3.29 3.32 3.20 3.23 3.24 3.27 3.19 3.31...
- Page 12 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.