Related Manuals for SensorTherm METIS H322
Summarization of Contents
General Information
Information to this Manual
Details on how to safely and efficiently use the device and its manual.
CE Conformity and Standards
Information regarding CE conformity and relevant standards for the product.
Limitation of Liability
Producer's liability limitations concerning product usage and damages.
PID Controller Functionality
Description of the PID controller's design for controlling temperatures.
Terms of Warranty
Details on the warranty period, coverage, and exclusions.
Copyright Information
Information on manual copyright protection and usage restrictions.
Customer Service and Spare Parts
Contact information for technical support and purchasing spare parts.
Product Disposal Guidelines
Instructions for environmentally friendly disposal of the pyrometer.
Safety Precautions
Manual Usage Instructions
Ensures users read and understand the manual before operation.
Supplementary Operation Information
Explanation of symbols used to simplify information search.
Operator Responsibility
Operator's legal responsibilities for workplace safety.
Warning Notes Overview
Explanation of symbols indicating risks and safety instructions.
Electrical Connection Safety
Safety guidelines for electrical connections and mains voltage.
Laser Targeting Light Safety
Safety instructions regarding the laser targeting light.
Through-lens Sighting Safety
Safety instructions for using the view finder and eye protection.
Device Labels and Visibility
Importance of visible and legible device labels and warning stickers.
Overview of Pyrometer System
Intended Use of Pyrometers
Describes the 2-color pyrometers for non-contact temperature measurement.
Scope of Delivery
Lists the items included in the pyrometer package.
Model Designs and Features
Details standard models and differences in fiber optic models.
Identification Label Information
Explains the information provided on the device's identification label.
Electrical Connection Details
Cable Colors and Pin Assignment
Details on cable colors and pin assignments for the 17-pin connector.
Power Supply Connection
Instructions for connecting the supply voltage and fuse requirements.
Factory Settings Overview
Lists the default factory settings for pyrometer parameters.
Analog Output Configuration
Details on configuring analog outputs for temperature display.
Digital Inputs, Outputs, and Analog Input
Configuration of digital inputs/outputs and analog input.
Serial Interface RS232 / RS485
Information on serial interface for digital communication.
Interface Converter Accessory
Using interface converters for PC connection.
Cable Shielding Requirements
Guidelines for using shielded cables for EMC compatibility.
Camera Module Connection
Details on the additional connector for camera module output.
Mechanical Installation Guide
Pyrometer Mounting
Instructions on how to mount the pyrometer securely.
Mounting Optical Fiber and Optics
Procedures for mounting optical fibers and optics for devices.
Bending Radius for Optical Fiber
Specifies minimum bending radius to prevent fiber damage.
Winding and Unwinding Optical Fiber
Guidelines for handling optical fibers to avoid damage.
Optical Fiber Mounting Procedure
Step-by-step instructions for mounting the optical fiber.
Connecting the Optics
Instructions for connecting optical fiber connectors to the optics.
Ambient Temperature Considerations
Information on permissible ambient temperatures and overheating.
Alignment onto Measuring Object
Explains ratio technology and proper alignment for accurate measurements.
Alignment with Laser Targeting Light
Guidance on using the laser for alignment and its safety.
Alignment with Through Lens Sighting
Instructions for alignment using the view finder and eye safety.
Alignment with Camera Module
How to align the pyrometer using the camera module.
Setting Measuring / Focus Distance
Procedures for setting the focal distance for optimal measurement.
Manually Focusable Optics Adjustment
Steps for adjusting focus manually on optics.
Motorized Focus Optics Adjustment
How to adjust focus via software for motorized optics.
Focusable Fiber Optic Lenses
Instructions for adjusting focus on fiber optic lenses.
Spot Size Tables
Optical data tables showing spot sizes for different device types.
Manually Adjusted or Motorized Focus Optics
Spot size data for optics with manual or motorized focus.
Focusable Fiber-Optic Lenses Spot Sizes
Spot size data for focusable fiber-optic lenses.
Spot Size Calculation Outside Focus
Formula for calculating spot size diameter outside the focused distance.
Pyrometer Parameters and Settings
Emissivity Slope Adjustment
Guidance on adjusting emissivity slope for accurate measurements.
Emissivity in Single-Channel Mode
Using the pyrometer in single-channel mode and emissivity input.
Transmittance Settings
Consideration of window transmittance for accurate measurements.
Spot Size Fill Factor
Explanation of fill factor for 1-color mode measurements.
Switch-off Level Configuration
Setting the threshold for measurement switch-off due to low signal.
Switch-off Verification Timing
Setting a time delay for the switch-off function.
Dirty Window Alarm Function
Detects optics contamination and triggers an alarm.
Response Time t90 Settings
Adjusting response time for tracking temperature changes.
Dynamic Adaptation at Low Signal Levels
Automatic response time adjustment for low signal levels (M3 only).
Maximum Value Storage (Peak Picker)
Functionality of the peak picker and clear time settings.
Temperature Sub Range Adjustment
Scaling temperature range for specific conditions or analog outputs.
Customizing Analog Output
Setting analog output ranges independently of temperature sub range.
Analog Output Configuration
Details on assigning signals to analog output 1 and 2.
Test Current for Analog Outputs
Setting a test current for analog outputs via device or software.
Upscale-Burnout Function
Enabling upscale-burnout for analog output during shadowing.
Interface Type Selection
Selecting between RS232 or RS485 interface (M3 models).
Baud Rate Settings
Setting the baud rate for serial interface communication.
Temperature Unit Selection
Option to display temperature in Celsius (°C) or Fahrenheit (°F).
Device Address Configuration
Assigning device addresses for RS485 bus operation.
Interface Delay / Answer Delay
Setting interface delay to improve communication reliability.
SensorTools Software Operations
Program Start and Pyrometer Connection
Steps to start the software and connect the pyrometer.
Software Window Overview
Introduction to the SensorTools software interface.
Main Window Graphs Display
Shows temperature profile over time and graph scaling options.
Control Window Features
Access to pyrometer parameters, settings, and live data.
Device Settings and Configuration
Basic device settings including temperature, I/O, and interface.
Digital Input / Output Configuration
Assigning functions to digital inputs and outputs.
Service Functions
Backup, restore, and printing of device parameters and service files.
Interface Settings Configuration
Setting baud rate, device address, and interface delay.
Data Collection (Buffer Mode)
Configuring data collection for transferring measurement data.
Single-Point Adjustment Procedure
Readjusting the pyrometer for specific temperature measurements.
PID Controller Configuration
Setting up and configuring the integrated PID controller.
Setup Management
Storing and activating up to 7 different parameter settings.
Data Playback Functionality
Opening and viewing saved measurement data files.
Communication and Options
Software language, firmware updates, and terminal commands.
Spot Size Calculator Tool
Calculating spot size diameter based on distance and optics.
Technical Data Specifications
Device-Specific Data for M3 Models
Technical specifications specific to M3 pyrometer models.
Device-Specific Data for H3 Models
Technical specifications specific to H3 pyrometer models.
Common Pyrometer Data
General technical data applicable to all pyrometer models.
Storage Conditions
Recommended conditions for storing the pyrometer.
Device Dimensions
Physical dimensions and mounting details of the pyrometer.
Composition of the Type Number
Explanation of the 22-digit model number encoding.
Available Accessories
List of optional accessories for the pyrometer system.
Maintenance and Troubleshooting
Cleaning Procedures
Instructions for cleaning the pyrometer lens safely.
Pyrometer Calibration
Recommendation for periodic recalibration for accuracy.
Troubleshooting Guide
Guidance on diagnosing and resolving device malfunctions.
Need help?
Do you have a question about the METIS H322 and is the answer not in the manual?
Questions and answers