Download Print this page

SensorTherm METIS H3 series User Manual

Pyrometer

Hide thumbs

Table Of Contents

Table of Contents

Table of Contents
General
Information to this Manual
CE Conformity and Standards
Limitation of Liability
Devices with PID Controller
Terms of Warranty
Copyright
Explanation of Symbols
Customer Service / Spare Parts
Disposal
Safety
General
Electrical Connection
Laser Targeting Light
Through-Lens Sighting / View Finder
Device Labels
Responsibility of the Operators
Overview
Intended Use
Scope of Delivery
Model Designs
Electrical Connection
Cable Colors and Pin Assignment (14-Wire Connection Cables)
Factory Settings
Power Supply
Analog Output 1 and 2
Configurable Inputs / Outputs
Serial Interface RS232 / RS485 (M3: Switchable RS232 / RS485; H3: Only RS485)
Interface Converter (Accessory)
Shielding
Camera Module
Devices with Additional Profibus-DP or Profinet Connection
Pin Assignment Profibus-DP
Pin Assignment Profinet
Mechanical Installation
Mounting
Mounting Optical Fiber / Optics (Only Devices with Optical Fiber)
Bending Radius Optical Fiber
Winding and Unwinding the Optical Fiber
Mounting of Optical Fiber
Connect the Optics
Ambient Temperature
Alignment Onto the Measuring Object
Alignment with the Laser Targeting Light
Alignment with the through Lens Sighting / View Finder
Alignment with the Camera Module (Only M3)
Setting the Measuring / Focus Distance
Manually Focusable Optics
Motorized Focus Optics (Only M3)
Manually Focusable Fiber Optic Lenses
Fixed Focus Optics (Only M3)
Spot Size Tables
Manually Adjusted or Motorized Focus Optics with Laser Targeting Light or View Finder
Manually Adjustable or Motorized Focus Optics with Camera Module
Manually Adjustable or Motorized Focus Optics Model M313
Manually Adjusted or Motorized Focus Optics Model M323
Focusable Fiber-Optic Lenses
Fixed Focus Optics
Calculation of the Spot Size Diameter Outside the Focused Distance
Configuring the Pyrometer
Displays on the Device
Key Functions
Parameters / Settings
Response Time T
Dynamic Adaptation at Low Signal Levels (Only M3 Devices)
Storage Mode Maximum Value Storage (Peak Picker) / Clear Time T
Emissivity Ɛ
Transmittance
Spot Size Fill Factor
Temperature Sub Range
Temperature Unit
Analog Output
Test Current
Upscale-Burnout (Only Via Software Sensortools)
Customize Analog Output (Only Via Software Sensortools)
Interface Type (Only M3 Devices)
Baud Rate
Address
Interface Delay / Answer Delay)
Key Lock
Sensortools Software
Program Start / Connecting the Pyrometer
Software Windows
Main Window  Graphs
Control Window
Device Settings and Configuration
Configurable Inputs / Outputs
Service Functions
Interface
Data Collection (Buffer Mode)
Single-Point Adjustment
PID Controller Equipment
Profibus- / Profinet Equipment
Fieldbus Mode Selection for Reading the Pyrometer Data
Writing Pyrometer Data
Setups
Data Playback
Communication / Options
Spot Size Calculator
Sensorflash Software (Update Firmware)
Technical Data
Storage
Dimensions
Composition of the Type Number
Accessories
Maintenance
Cleaning
Change Protection Window / Lens at Manual Focusable Optics
Pyrometer Calibration
Trouble-Shooting
Communication Via Serial Interface / Interface Commands
Index

Quick Links

1 Table of Contents
2 Information to this Manual
3 Electrical Connection
Download this manual

Pyrometers

METIS M308 / M309 / M313 / M316 / M318 / M323

METIS H309 / H316 / H318

With 12-pin connector, display and push button device configuration

Versions with integrated optics, optical fiber, PID controller, Profibus / Profinet

User Manual

Table of Contents

Need help?

Do you have a question about the METIS H3 series and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Metis m3 seriesMetis m308 Metis m316Metis m323Metis m318 Metis m309 ... Show all

SensorTherm METIS H3 series User Manual

Quick Links

Need help?

Questions and answers

Related Manuals for SensorTherm METIS H3 series

This manual is also suitable for:

Table of Contents