Settings; Maintenance + Cleaning; Disposal; Warranty - DEXAPLAN VT 623 - 9-10-2007 Manual

Switching the monitor on and off
Press the monitor button [38] in order to see the camera image.
!
The camera image is displayed on the monitor and the operating
status LED [35] lights red.
The monitor image disappears when the monitor button is pressed
!
again or automatically after approx. 60 seconds and the operating
status LED lights green again.

Settings

Adjusting the monitor image
The adjustments can only be made when the monitor image is activated
Press the monitor button [38].
!
Press the image adjustment button
!
is displayed on the monitor.
You reach the respective next menu item by repeated pressing of the
!
image adjustment button (the current menu item is pink) or the
settings menu disappears after the last menu item. The corresponding
setting value is displayed numerically and graphically as a bar.
You can change the setting value of the respective menu item by
!
pressing the buttons [41] and
+
BRIGHTNESS: Brightness (0 to 100)
CONTRAST: Contrast (0 to 100)
SHARPNESS: Sharpness (0 to 6)
COLOUR: Colour saturation (0 to 100)
HUE: Hue (0 to 100); not active for PAL setting
VIDEO: NTSC or PAL (set to PAL)
The settings menu disappears automatically after approx.10 seconds if no
action is taken in the menu, however at the latest after approx. 60 seconds
when the monitor image disappears.
Tip:
In order to have sufficient time for the adjustment, press the talk button
[36] after switching on the monitor as the monitor image then
remains switched on for approx. 4 minutes.
Adjusting the volume of the indoor station ring tone
In 2 steps
In order to have a quieter chime, set the volume switch
!
"-"; set it to "+* for the louder chime.
Continously adjustable
Switch on the monitor using the monitor button
!
Press the volume button
+
!
chime and the conversation; to reduce the volume, press the volume
button [40] (settings value will be displayed on the monitor:
can be set between 0 and 100).
Selecting chime melody
You can select one of three melodies using the chime switch
Set the chime switch to one of the three positions:
!
GB / IE - 24
[42] once; the settings menu
[40].
[44] to
[38].
[41] to increase the volume of the
[43].
1/2/3
Position 1: 2x "Ding-Dong"
Position 2: short melody
Position 3: longer melody "For Elise"

Maintenance + cleaning

The unit is maintenance-free.
!
Regularly check the technical safety and functioning
!
Use a dry cloth for cleaning the surfaces. For stubborn dirt, clean the
!
surfaces with a soft, fluff-free, slightly moist cloth without cleaning
additives.
Carefully clean the slits of the loudspeaker [19 and 34] with a dry
!
brush.

Disposal

Do not simply throw away packaging material and worn-out
equipment but send it for recycling. Please ask your local authority
for details of your recycling centre or nearest collection point.

Warranty

This product is warranted for 3 years from the date of purchase. Keep the
till receipt in a safe place as proof of purchase. Contact the service office in
your country in the event of a warranty claim. This warranty is only valid
for the original purchaser and cannot be transferred. The warranty only
covers material or manufacturing defects. It does not cover wear or
damage to fragile parts. The product is only intended for private use and
not for commercial use. The warranty is void in the case of misuse and/or
improper handling, application of force and for any unauthorized repairs.
This warranty does not affect your legal rights.

Service

Information about dealing with problems is available at
www.dexaplan.com. Contact our service centre by email
(service@dexaplan.de) or by telephone (
Mon Fri 08:30 17:00 / 1890 851 851 Mon Fri 08:30 17:00)
IE
for any questions. You can obtain all the necessary information about
service issues, such as returning a defective product etc.
Ident-No.: 12-10-2007-VT 623-ITESGBDE-L75
0870 / 241 3029
GB
Dexaplan GmbH
Paul-Böhringer-Str. 3
D - 74229 Oedheim
12/10/2007