Related Manuals for DEXAPLAN DP 601 - 9-2005
Summary of Contents for DEXAPLAN DP 601 - 9-2005
- Page 1 Door Intercom DP 601 Operation and Safety Notes ........Page 5 Cover_Türsprechanlage_GB.indd 5-8 30.09.2005 9:09:05 Uhr...
- Page 2 Outdoor Unit Door Release Indoor Unit (optional) Cover_Türsprechanlage_GB.indd 9-12 30.09.2005 9:09:09 Uhr...
-
Page 3: Table Of Contents
Content Introduction Proper use................page 6 Pack contents ............... page 6 Equipment ................page 6 Technical data ............... page 7 Safety instructions ............page 7 Initial operation Function ................page 9 Preparation and material required ......... page 9 Choosing the installation positions ........page 9 Connection ................ -
Page 4: Introduction
Introduction Door Intercom DP 601 Pack contents We supply the door intercom with the following components: Introduction indoor unit (including receiver and mounting plate) Please read these operating instructions thoroughly outdoor unit (including flush mount box) and carefully. They are part of this product and cable (9 m, twin-core, with coded cores and contain important instructions relating to its operation fork-type cable lugs) -
Page 5: Technical Data
Introduction / Safety instructions Safety instructions Flush mount box Cable opening The following instructions are for your own safety Fixing clip and satisfaction when operating the DP 601 door Retaining screw 1 intercom. Please note that non-compliance with these safety instructions can lead to a serious risk Technical data of accident. - Page 6 Safety instructions cover the air vents with any objects, e.g. cur- • Only use the device with the supplied original tains. Do not operate the indoor unit in cup- parts or parts suitable for it. boards or very small spaces with insufficient •...
-
Page 7: Initial Operation Function
Initial operation Initial operation the flush mount box A standard 12 V DC door release and a second Function twin-core cable (with coded cores, in accor- Handset dance with the instructions of the door release The receiver on the indoor unit is for spea- manufacturer) for connection of the door re- king into and listening during communication with... -
Page 8: Installation
Initial operation Connect the second core (e.g. white) of the The bared cores can be connected to the ter- minal screws. first cable (from the indoor unit to the out- door unit) to terminal screw 2 Indoor unit (see Fig. B) Figure G shows connection of all components ... -
Page 9: Operation
Initial operation the four fastening screws and the four wall (mouthpiece) of the receiver plugs onto the flat surface in the chosen instal- The visitor can hear you through the loudspeaker lation position. Make sure that the fastening and answers with the aid of the microphone lugs (4 x) are pointing away from the surface. -
Page 10: Maintenance And Cleaning
Check the technical safety and function of the Service device regularly. Use a soft cloth and a mild agent, if necessary Please visit www.dexaplan.com for the latest infor- mild soap suds, to clean the plastic and metallic mation on troubleshooting and dealing with surfaces.
Need help?
Do you have a question about the DP 601 - 9-2005 and is the answer not in the manual?
Questions and answers