Table of Contents
Related Manuals for de Gier GW10
Summarization of Contents
Declaration of Incorporation
Compliance with European Directives
Details on compliance with directives and applied harmonised standards.
Product Dimensions
Dimensional Drawings Overview
Provides drawings and dimensions for GW10, GW20-GW30, and GW40-GW150 models.
Explanation of Symbols
Symbols in Manual
Explanation of symbols and instructions used within the manual.
Symbols on Motor Gearbox
Description of symbols found directly on the motor gearbox unit.
Safety Instructions
General Safety Precautions
Essential safety guidelines for installation, operation, and maintenance.
Qualified Personnel Requirements
Defines requirements and responsibilities for staff performing tasks.
Product Identification
Manufacturer Details
Contact and address information for the manufacturer, De Gier B.V.
Rating Plate Information
Explanation of the data shown on the product's rating plate.
Model Version Breakdown
Details on how to interpret the item number and series versions.
Usage Instructions
Permitted and Restricted Use
Details intended applications, restrictions, and misuse warnings.
Operating Conditions and Storage
Specifies environmental conditions, temperature ranges, and storage guidelines.
Installation Guide
Installation Positions and Vent Plug
Guidance on selecting mounting positions and fitting the vent plug.
Mounting the Motor Gearbox
Instructions for physically attaching the motor gearbox to the drive train.
Mounting the Chain Coupling
Detailed steps for connecting the gearbox output shaft via a chain coupling.
Limit Switch Adjustment
Adjustment Procedure
Step-by-step guide for setting the built-in limit switches.
Potentiometer Kit
Potentiometer Mounting and Operation
Instructions for retrofitting and using the optional potentiometer.
Electrical Connections
AC Motor Mains Connection
Wiring instructions for single and three-phase AC motors.
DC Motor Mains Connection
Wiring instructions for DC motors.
Limit Switch Wiring
Procedure for connecting the internal limit switches.
Commissioning and Use
Commissioning Test Run Procedure
Steps for performing an initial test run of the system.
General Use Guidelines
Information on noise levels, heating, and operational limits.
Maintenance and Dismounting
Maintenance Intervals and Checks
Details on periodic inspection tasks and intervals.
Dismounting the Motor Gearbox
Instructions for safely removing the motor gearbox from the system.
Troubleshooting Guide
Power Outage Troubleshooting
Steps to take when the motor gearbox experiences a power outage.
Drive Not Running Troubleshooting
Diagnosing issues when the motor gearbox fails to run.
Travel Past End Position Troubleshooting
Resolving problems related to exceeding end positions.
Oil Leak Troubleshooting
Identifying and addressing oil leakage issues.
Humming Noise Troubleshooting
Diagnosing the cause of humming noises from the motor.
Parts, Disposal, and Warranty
Spare Parts and Replacement
Information on using original spare parts and replacement procedures.
Disposal of Materials
Guidelines for the proper disposal of used oil and gearbox components.
Warranty Information
Details on warranty terms and conditions.
Need help?
Do you have a question about the GW10 and is the answer not in the manual?
Questions and answers