Sony SU-46NX1 Instructions Manual page 16

3
Adjust the angle.
1 Tilt the TV forwards.
2 Set the Adjuster at the required angle (forward for
0; back for 6 degrees).
3 Position the TV back again.
~
• Factory setting is 6 degrees.
• When positioning the TV back, support the Adjuster with a
hand. (In the case of setting to 0 degrees only.)
Adjuster
0 degrees
8
(GB)
1,3
2
6 degrees
6°
0°
4
Secure the screws.
Firstly, secure the Adjuster and the Neck with the
Angle Adjustment Screw (PSW5 × 10) silver (1), then
two screws (2) (using the three screws removed in
step 2).
2
1
Angle Adjustment Screw
(PSW5 × 10) silver