Advertisement
Table of Contents
- 1 Table of Contents
- 2 Important User Information
- 3 Preinstallation Considerations
- 4 Calculate Power Requirements
- 5 Initial Handling
- 6 Key the I/O Chassis
- 7 Install the Module and Field Wiring Arm
- 8 Connect Wiring to the Field Wiring Arm
- 9 Replacing the Fuse
- 10 Intepreting the Status Indicators
- 11 Hazardous Location Approval
- 12 Specifications
- Download this manual
To The Installer
Important User Information
DC (10-30V) Output Module
Cat. No. 1771-OVN Series B
This document provides information on:
For this reference information
Because of the variety of uses for the products described in this
publication, those responsible for the application and use of these
products must satisfy themselves that all necessary steps have been
taken to assure that each application and use meets all performance
and safety requirements, including any applicable laws, regulations,
codes and standards. In no event will Rockwell Automation be
responsible or liable for indirect or consequential damage resulting
from the use or application of these products.
Any illustrations, charts, sample programs, and layout examples
shown in this publication are intended solely for purposes of
example. Since there are many variables and requirements associated
with any particular installation, Rockwell Automation does not
assume responsibility or liability (to include intellectual property
liability) for actual use based upon the examples shown in this
publication.
Installation Instructions
See page
1
4
4
5
5
6
7
10
See page
10
11
12
Publication 1771-IN036C-EN-P - July 2002
Advertisement
Table of Contents
Related Manuals for Allen-Bradley 1771-A1B
Summarization of Contents
Important User Information
Important User Information
Critical safety and operational guidelines for users to ensure proper product application and handling.
Preinstallation Considerations
Essential preparatory steps and checks before installing the module to ensure correct setup and prevent issues.
Calculate Power Requirements
Guidance on determining the necessary power for the module and system for operational stability.
Initial Handling Procedures
Instructions for safely handling the module to prevent damage during unpacking and transport.
Keying the I/O Chassis
Procedure for configuring I/O chassis slots using keying bands to match module requirements.
Install the Module and Field Wiring Arm
Step-by-step guide for physically installing the output module and its associated wiring arm.
Connect Wiring to the Module
Detailed instructions for making electrical connections through the field wiring arm.
Replacing the Fuses
Procedure for safely replacing a blown fuse within the module, ensuring continued operation.
Environment and Enclosure
Environment and Enclosure
Details on suitable industrial environments, enclosure requirements, and pollution/voltage ratings.
Interpreting the Status Indicators
Interpreting the Status Indicators
Explanation of the module's status indicators and their meaning for output control and fuse condition.
Hazardous Location Approval
Hazardous Location Approval
Information on operating the equipment in hazardous environments and compliance requirements.
Specifications
Specifications
Detailed technical specifications including ratings, environmental conditions, and immunity.
Need help?
Do you have a question about the 1771-A1B and is the answer not in the manual?
Questions and answers