Related Manuals for Haiwell S08AI
Summarization of Contents
Analog Module User Manual
Product Model List and Dimension
Lists product models, specifications, and physical dimensions for Haiwell analog modules.
Indicator Description
Explains the meaning of LED indicators on the analog modules for status monitoring.
Power Supply Specification
Details voltage, frequency, and protection requirements for module power supply.
Environmental Specifications for Product
Outlines operating temperature, humidity, vibration, and impact resistance for modules.
Analog Input (AI) Specification
Specifies input ranges, resolution, impedance, and precision for analog input modules.
Analog Output (AQ) Specification
Details output ranges, resolution, load impedance, and drive capability for analog output modules.
Analog Input (AI) Wiring Diagram
Provides visual guides for wiring analog input signals to the module.
Analog Output (AQ) Wiring Diagram
Illustrates how to wire analog output signals from the module.
MPU Terminal Wiring Diagram
Shows terminal connections for MPU and expansion modules for electrical setup.
Module Parameter Table
Maps CR codes to Modbus register addresses for configuring module parameters.
Mounting and Installation
Guides on physically installing the PLC analog modules using rail or screw mounting.
Analog Module Application Case
Expand Module via Host PLC Parallel Port
Explains expanding PLC functionality with analog modules via the parallel bus interface.
PLC Programming Skills for Analog Modules
Provides examples of writing PLC programs for analog module alarm conditions.
Display Analog Values on SCADA/HMI
Details displaying analog values from modules on SCADA or HMI systems.
Read Module Channel Disconnection Alarm
Demonstrates reading channel disconnection alarms using CR codes and Modbus.
Module Used as Remote IO
Discusses using analog modules as remote I/O devices via serial or Ethernet communication.
RS485 Remote IO: Read S04AI Temperature Values
Shows reading temperature values from an S04AI analog module using RS485.
RS485 Remote IO: Write S08AO Output Values
Demonstrates writing output values to an S08AO analog module via RS485.
Ethernet Remote IO: Read/Write S08XA-e Channel I/O
Illustrates reading/writing I/O values for an S08XA-e module using Ethernet.
Haiwell Cloud Configuration with S08AI Module
Explains configuring an S08AI module with Haiwell Cloud SCADA via serial port.
Need help?
Do you have a question about the S08AI and is the answer not in the manual?
Questions and answers