Table of Contents
Advertisement
•
Thumbnail may not be displayed due to different file formats.
•
Movie files are not supported.
Slide show Mode
Slide show Mode
•
Quick start
When the projector is set to the SD/USB input and "Quick start" is set to "On"
slide show starts with JPEG files in the root folder of the SD/USB memory device.
•
Start from file view mode
When a JPEG file is selected and press the
starts from the selected JPEG file.
Slide show operation
•
In the slide show mode, a JPEG file is displayed on the screen fully. To change the files,
select
or
. The picture displayed in the same order as displayed in the file view
mode.
•
Pictures in slide show mode are displayed slightly less sharp than their originals due to
internal processing.
•
To pause during slide show, press the
button again to cancel pause and resume slide show.
•
It takes several seconds to display the next slide.
The reading time varies depending on the file size.
•
When "Slide Show" is set to "Auto." in the Default setting menu
change automatically when displaying. Display time also can be changed in "Interval"
setting in the Default setting menu
the next file, so it takes longer to display the next picture than the setting.
•
When "Slide Show loop" is set to "Off", the slide show cycles only once, and then enter
file view mode. After slide show reaches the last file of the list,
the last picture. This indicates the end of the slide show.
When "Slide Show loop" is set to "On", the slide show starts from the first file again
after displaying the last file.
•
When JPEG file has a failure or unsupported format,
and the projector automatically starts to read the next JPEG file.
Picture transition effect is available in the slide show. The following four modes can be
selected in "Display effect" in the Default setting menu
•
None: displays screen without special effects.
•
Wipe: displays the next slide gradually to the right ( ) over the current slide.
•
Dissolve: adds dissolve effect to screen.
•
Cover: screen overlaps previous image.
Note
•
If you switch to another source during slide show operation, the slide show will not stop.
button in the file view mode, slide show
button, and the
appears when reading the next file.
. Interval time doesn't include reading time of
p.36
appears on the current picture
39
will be displayed. Press the
, the slide will
p.36
will be displayed on
.
p.36
, the
p.36
Advertisement
Table of Contents
