Placement - Toshiba TDP-F10U Owner's Manual

Led projector
Table of Contents

Advertisement

Placement

Placement Styles
As shown in the figures below, this device can be placed in 4 different styles.
The factory setting is "floor-mounted front projection." Set the [Projection mode] in the
Default setting menu
Floor-mounted front projection
Ceiling-mounted front projection
WARNING
Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS
when placing the unit.
If you wish to mount the projector on the ceiling, be sure to ask your dealer to do
so. Mounting the projector on a ceiling requires special ceiling brackets (sold
separately) and specialized knowledge. Improper mounting could cause the
projector to fall, resulting in possible injury and unit damage.
If the projector is ceiling-mounted, install the breaker for turning off the power in
case of anomaly. Let everyone involved with the use of the projector know that fact.
, in accordance with your needs.
p.36
Floor-mounted rear projection
Ceiling-mounted rear projection
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tdp-f10

Table of Contents