Table of Contents
Advertisement
Quick Links
EC9830
A & B Series
Carbon Monoxide
Analyzer
Operation Manual
98307600 Rev. C-1. November 2005
Tel:
(61 3) 9894 2399.
Fax:
(61 3) 9894 2445.
E-mail:
ecotech@ecotech.com.au
Spare Parts
parts@ecotech.com.au
Address:
Australia - Head Office
12 Apollo Court, Blackburn, Melbourne,Victoria, 3130, Australia
Customer Service Web site.
www.ecotech.com.au
Advertisement
Table of Contents
Related Manuals for Ecotech B Series
Summarization of Contents
CHAPTER 1, DESCRIPTION
1.1 Specifications
Details technical specifications like range, noise, drift, and output capabilities.
1.2 U.S. EPA Reference Method
Outlines operational conditions and requirements for U.S. EPA designation.
CHAPTER 2, INSTALLATION AND OPERATION
2.1 Mechanical Installation
Covers physical setup, location selection, and component connections for the analyzer.
2.2 AC Power Connection
Explains how to properly connect the analyzer to AC power, including voltage settings.
2.3 Operation
Describes general operational procedures and the analyzer's interface.
2.4 Analyzer Calibration
Details the process for calibrating the EC9830 analyzer to ensure measurement accuracy.
2.5 Menus and Screens
Illustrates and describes the various menus and screens available on the EC9830 analyzer.
2.6 Analog Output
Describes analog output connections and configuration for recorders and data loggers.
2.7 Password Protection
Features a password protection option to prevent unauthorized configuration changes.
CHAPTER 3, CALIBRATION
3.1 Overview
Introduces the calibration chapter, discussing calibration principles and procedures.
3.2 Multipoint Calibration Procedure
Describes multipoint calibration methods for establishing analyzer response across its range.
3.4 Automatic Zero/Span Checks (AZS)
Describes the automatic zero/span checking feature for maintaining calibration accuracy.
3.5 Calibration References
Lists references for calibration procedures and gas standards.
CHAPTER 4, DIGITAL COMMUNICATION
4.1 Discrete Control
Covers discrete inputs and outputs for controlling analyzer functions and status indication.
4.2 Serial Control
Explains serial communication modes and connection requirements for the analyzer.
4.4 Serial Command Control
Details available command sets (9800 and Bavarian) for controlling the analyzer via serial port.
4.5 USB Communication
Explains how to connect and communicate with the analyzer using a USB port.
4.6 EC9800 Communicator Software
Details the EC9800 Communicator software for data acquisition and remote control.
Need help?
Do you have a question about the B Series and is the answer not in the manual?
Questions and answers