Khyam MOTORDOME RV HUB Pitching & Striking Instructions

Table of Contents

Pitching & Striking Instructions for :-

WARNING:

If this tent / awning is not erected in accordance with the instructions damage could be caused to the

joints, poles or fabric. It is important that the tent is properly guyed at all times, particularly in strong winds

otherwise pole or joint damage may occur.

DO NOT PUSH TENT PEGS IN BY HAND, ALL TENT PEGS SHOULD BE DRIVEN HOME USING A

WOODEN OR RUBBER FACED MALLET OR SIMILAR TOOL.

Table of Contents

Need help?

Do you have a question about the MOTORDOME RV HUB and is the answer not in the manual?

Figures 1-6 detail removing the awning from its bag, spreading it, and lifting the central hub for alignment.

Figures 7-14 explain extending poles and locking manual joints, ensuring fabric freedom.

Figures 15-22 focus on locking main pole joints, pulling fabric down, and pegging all points securely.

Figures 26-33 detail removing and attaching zip-out panels for specific models like Dub Hub, XL, and RV Hub.

Instructions on aligning the vehicle and ensuring the connection tunnel has a smooth, non-creased fit.

Figure 34 shows how to adjust awning position relative to the vehicle for optimal connection and fit.

Figures 35-43 describe unlocking lower pole joints and folding poles to collapse the awning structure.

Figures 40-47 detail unlocking upper joints, folding poles, and gathering flysheet fabric efficiently.

Figures 48-52 cover rolling the awning, securing straps, and packing it into the carry bag.

Addresses common user inquiries regarding pole durability, spares availability, water resistance, and wind performance.

Provides crucial advice on peg removal, fabric care, condensation, damage repair, and fire safety.