Table of Contents
Advertisement
COLOR TEMPERATURE
You can adjust the white balance of the projected image.
Less
bluish
Setting range: -6 to +6
DYNAMIC IRIS
You can switch automatic adjustment system of the lamp
and the lens iris, which control the contrast and black
level, on/off.
ON:
Automatic adjustment
OFF:
No adjustment
LIGHT HARMONIZER
The luminance sensor detects the brightness of the
room and keeps the luminance in balance automatically.
If needed, you can switch this function on/off from
MODE, or adjust it manually from MANUAL by pressing
I H.
Setting range: -8 to +8
NOTE:
• To assure correct performance of the LIGHT
HARMONIZER, do not interrupt the light on to the
luminance sensor. See "Projector body" on page 12.
ADVANCED MENU
You can perform more detailed image adjustment
manually.
GAMMA
You can adjust linear intensity at 3 levels. Press I
H to increase/decrease 1 point.
Levels
GAMMA HIGH
GAMMA MID
GAMMA LOW
Setting range: -8 to +8
CONTRAST
You can adjust the amount of contrast in RGB
colors individually. Press I H to increase/
decrease 1 point.
RGB
CONTRAST R
CONTRAST G
CONTRAST B
Setting range: -16 to +16
Less
reddish
NOTE:
Default setting
0
NOTE:
0
0
Default setting
0
0
0
BRIGHTNESS
You can adjust the brightness in RGB colors
individually. Press I H to increase/decrease
1 point.
RGB
BRIGHTNESS R
BRIGHTNESS G
BRIGHTNESS B
Setting range: -16 to +16
COLOR MANAGEMENT
You can manage your own defined color settings.
See "Setting your own color profile" on page 24.
NR (Noise Reduction)
You can switch the automatic noise reduction
system on/off. Press I H to select the required
setting.
ON:
Automatic noise reduction
OFF:
No noise reduction
MPEG NR
You can switch the automatic noise reduction
system for MPEG format images on/off. The
system minimize block noise and mosquito noise
to eliminate jagged edges, providing an overall
smoother image. Press I H to select the required
setting.
ON:
Active
OFF:
Deactive
• MPEG NR system is not available with COMPUTER/
HDMI (VGA480) signals.
CINEMA REALITY
You can switch the automatic image synchronizer
on/off for 24 frames a second images, such as
movies. Press I H to select the required setting.
ON:
Active
OFF:
Deactive
• CINEMA REALITY is effective only with interlace
signals.
PICTURE menu
Default setting
0
0
0
E
NGLISH - 31
Advertisement
Table of Contents
