Advertisement
049. WXGA MODE SETTING SET
**********************************************************************
Function:
This command sets the WXGA Mode of projector.
Command:
03H B1H 00H 00H 02H DATA01 DATA02 CKS
Data Portion
Contents
-----------------------------------------------------------------
DATA01
C3H fixed
DATA02
Setting Value
00H : OFF
01H : ON
Response: At the time of a success
23H B1H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2)
Data Portion
Contents
-----------------------------------------------------------------
DATA01
C3H fixed
DATA02
Results
00H : Normal
01H : Error
Response: At the time of a failure
A3H B1H 01H xxH 02H DATA01 DATA02 CKS
(*1)
(*2)
======================================================================
6. Response
----------------------------------------------------------------------
* At the time of a success( ACK )
This returns ACK without adding data portion to the command that does
not request data.
This returns ACK with adding data to the data portion for the command
that requests data.
* At the time of a failure( NAK )
This adds a cause of not accepting the command to data portion to
return it.
(Example) Power On
Command:
02H 00H 00H 00H 00H CKS
Response:
A2H 00H 01H 40H 02H DATA01 DATA02 CKS
======================================================================
7. Table of Response Error Codes
----------------------------------------------------------------------
(*3)
(*3)
(*4)
(*3)
Advertisement
